Jump to content

ChipByrd

Regulars
  • Posts

    225
  • Joined

  • Last visited

Posts posted by ChipByrd

  1. I am trying to decide if I want to keep my Chorus with BEC crossovers and ti tweeters OR RF-83s. The 83s obviously have more bass, so I added an SW-310 to my Chorus to fill out the bottom end. Here's my problem: I generally like the sound of the Chorus better, but the SW-310 doesn't really provide enough bass for my taste. I don't want boominess, but with some rock you want to feel it. I have tried placing the SW-310 all around the listening area, but even with the gain almost maxed, it doesn't impress. I am using a Cambridege 840a. Is their some trick or hookup procedure that I am missing? I may end up going with the 83s if I can't figure a way to get better performance from the SW-310. Help! I really want to keep the Chorus, but I want more bass. Thanks.

  2. I have Chorus speakers with BEC crossovers and ti tweeters. I want to use my SW-310 to fill out the lower end. Where would you guys set the crossover on the sub? If it is helpful, I am using a CA 840 int. amp. Thanks.

    Chip

  3. Thanks for the welcome, but I have been lurking around for a couple months. This site has been awesome. I really would like to hear from this who have had to make a decision between something like my Chorus and the RF-83s. Thanks.

  4. About four months ago, I remembered that I had a pair

    Klipsch Chorus in the basement. For

    whatever reason, I felt the bug to get them up and running. I traded my 5.1 for a Cambridge Audio 840a

    v2. I also ordered new crossovers from and

    tweeters from Bob Crites. The

    transformation was nothing less than amazing.

    But on Tuesday, I found a great deal on a pair of RF – 83’s. The last couple days I have going back and

    forth. Which one do I like best? Which one has the best sound? I can only keep one large pair so I have to

    decide. In the end, I will choose the

    one best suited to my ears and musical tastes.

    But I am interested, which would you guys choose and why? Thanks for the info.

  5. I realize that the tube vs SS is a real debate starter. I am trying to figure out how I can best use my paltry resources to get the best sound possible. So here's another question. How many of you two-channel guys have bass traps and other room enhancements? It seems like this provides good bang for the buck and would be helpful in my 11.5' x 18' basement. But most of the info I've read had to do with home studios or home theatre set-ups. Is it as important for two-channel as HT?

  6. Thanks Droid,

    One of my concern is budget. I realize the amount I listed isn't very much and I still need to spend some money on my listening are. My wife has been very tolerant thus far, but a big expenditre on a new tube amp might put her over the edge. When I taled to Mr. Crites he said he favors SS. I am sure I wll hear other opinions, which is what I want.

    BTW, what is WAF? It sounds like a designation for wife???

  7. I am in the process of developing a listening room. It is 11.5' x 18'. Apart from my audio gear, I plan on one extremely comfortable chair. I am currently figuring out what kind of acoustic gear is necessary. Musically, I am a mixed bag: from Clapton to Chopin. I definitely lean toward high volume. Hope this helps. Thanks for any advice.

  8. Hi,

    I recently upgraded my Chorus speaks with the Crites tweeters and crossovers. They sound sweet. I am running them through a Pioneer SX-1050. I also have a pair of RF-82ii that I am running through a Cambridge Audio 840a. I would like to try a tube amp. I have heard some on this site say they partner great with Klipsch and others say it doesn't make much of a difference. My budget is rather low so I will have to go used. I don't know where to begin. Can I find a good used tube amp in the $600 - 800 range? If so, what kinds would you suggest? Thanks for the help.

    Chip

  9. Hello,

    A couple weeks ago I asked for some help in setting up a

    listening room. I was told to provide a

    sketch of the area. Well, here it

    is.

    This is my basement.

    As you can see, it is basically divided into two sections. My wife has

    told me I can use either one, but preferably section 1. Door 1 is an open passageway to a hall. Door 2 is a standard interior door that leads

    into our laundry room. The windows are

    basic 36x39” and go to a standard ceiling.

    The walls and ceiling are all finished drywall and the floor is tight,

    Berber carpet. I plan to put one

    listening chair in there and any other items that might be helpful

    I will be using this exclusively for music. Currently, I have Chorus 1’s with upgraded

    tweeters and new crossovers from Bob Crites.

    I run them through a Cambridge Audio 840a int. I also have a vintage Pioneer sx-980 and a

    pair of Klipsch RB 81 ii’s and RF 62 ii’s.

    I also use a PS12 Sub for deep bass.

    I have an rDac through which I play digital music. This is my first foray into high (er) end

    audio, and I am sure I will be updating and adding things. Everything I read tells me that speaker

    placement and room acoustics are super important. The problem is that I don’t even know where

    to begin. I read about bass traps and

    audio panels and I am clueless.

    Any help or suggestions or directions you can give me will

    be greatly appreciated. I don’t want to

    spend a lot of money (under $600), but I would like to do the things that will

    give me the greatest enjoyment from my equipment. Again, I really appreciate whatever

    help may come.

    Chip

    post-54498-13819688975326_thumb.jpg

  10. Hi, I am back with more newbie questions.  I received my ti tweeter diaphragms and crossovers for my Chorus speakers.  They are installed and my fingers are crossed.  Initially, I had planned to get a Cambridge Audio 650a.  As the weekend approached, I decided to upgrade to the 840a V2.  It should be delivered tomorrow.  So my Chorus are just setting there--BUMMER. Here are my questions:

    1) If I decided to hook up my subwoofer, how does that connect to the 840a?  Can I use basic RCA cables from preamp out to the "L" and "R" on my sub?

    2) I keep hearing about break in times.  What would they be for the new 840a?  Do the new tweeters and crossovers need break in time?

    3) Is there a section in this forum to get advice about speaker placement and other things to I've the room better acoustics?  

    This sight has been awesome--friendly and informative.  

  11. Thanks USNRET, that sounds like good advice. Unfortunately, my receiver is a low end 7.1 Onkyo that is about 4 years old. So I am not sure that receiver would do the speakers justice. As I said, this is the first time I have had audio products beyond the cheap ones you get at the big box stores. But I can see why so many people get juiced about it.

  12. I just received my ti tweeter diaphragms and crossovers for my Chorus speakers. Thanks Bob C.  I won't be able to install them till Monday, which just happens to be when my Cambridge Audio 650a should arrive.  I am psyched!  This is my first foray into high (er) audio.  This sight has been immensely helpful--thanks.

  13. Let me say upfront, over the past couple weeks I have received some really helpful advice from this forum.  This has been great because I am just getting into this.  Anyway... here's where I am:

    I have a pair of Chorus speakers.  I have ordered new crossovers and the titanium tweeter kit from Bob Crites.  I have settled on the Cambridge Audio 650A for power.  And I have an Arcam rDac-kw to play my digital music.  Now... Here's the new question:

    When I look at the back of the Chorus, there are two posts.  On the Cambridge, there are two sets of two posts.  Do I just use one set on the Cambridge?  And what kind of wires should I use to connect the (older) Klipsch to the (new) Cambridge.  Some wires seem ridiculously expensive.  If it will make a noticeable improvement in sound, I would use consider spending up to $75 - 100.

    Thanks again for the friendly advice and your patience.  I am sure that this is sooo basic for many on the list.  My next series of questions will be about speaker placement... But the question of the day are sufficient :-).

    Chip (the Novice)

  14. Thanks for the input. As i said, this is tough for a novice. There are so many two-channel receivers for under $1,000 (my price range). When this the Cambridge Audio popped up for $499 it caught my attention. If there are any others you might suggest, I would greatly appreciate it.

    Thanks

  15. Howdy,

    A couple weeks ago I asked some questions about Chorus speakers. I have since ordered new crossovers and tweeter diaphragms from Bob Crites. I have an Arcam rDac-KW that I will be using because I want to play my music from my digital toys.

    What I want to acquire next is a new power source. I want something under $1,000 and under $800 would be even better. New or used?

    A friend suggested this: Cambridge Audio - 650A Integrated Amplifier - it is $499. I was told it is second generation and that is why the price is relatively low. It is located here: http://www.audioadvisor.com/prodinfo.asp?number=CA650A.

    Is the Cambridge a good alternative for me? Is there something far better in the above mentioned price range? There are so many options it is hard for a novice.

    Thanks for any help,

    Chip (the novice)

  16. Howsy,

    I asked this a couple weeks ago, but in the middle of the holidays there was almost no response. I have a pair of Chorus II's and am wondering if/how I shoul perform any maintenance on them. They sound good, but I would like to do everything possible to keep them that way for a long time. Thanks for the help.

  17. I have a set of Chorus II's. I have owned them for a few years. They sound good, but is there a diagnostic that you can run to ensure they are still functioning well? Also, what kind of regular maintenance should I perform? One more question: I have a 7.1 receiver, is there any advantage in bi-wiring them (we don't watch tv and don't use the surround sound)?

  18. Hi, I have to tell you I come to this page as a complete novice. I have a pair of Chorus II's and a pair of BMW 601's. I also have a good sub-woofer.  About four years ago I bought and an Onkyo home theater receiver. I also own a Pioneer SX 1250 (which I imagine still works well).

    My wife and I never watch TV and we got rid of it.  I want to move my speakers upstairs and use them just for music.  I have thought about bringing up the Onkyo and connecting an Arcam rDac KW.  This will cost about $650.  We like the Arcam because it will allow us to wirelessly access our digital music.

    But here's my question: For about the same cost as the Arcam, could I get significantly improved sound by buying a new receiver?  Also, I have heard that two channel produces better audio quality than the home theater receivers.  Which would be better for the speakers I own?

    If you read all this, thanks.  You are a trooper.  If you have any suggestions, they will be greatly appreciated.

×
×
  • Create New...