the real Duke Spinner
-
Posts
1742 -
Joined
-
Last visited
-
Days Won
1
Content Type
Forums
Events
Gallery
Posts posted by the real Duke Spinner
-
-
On 3/7/2024 at 5:57 PM, geezin' said:
I am definitely not going down that road. Spent the past 40 years or so screwing with things for a living. These days I buy what does the job I need it to w/o upgrades high maintenance and troubles. Tube amps are not for me. Not sure I'd wanna deal with class A heat.
Than
I have had my QuickSilver tube amp for 23 years
Still on original tubes No repairs ever. ,🙄
- 1
-
On 3/3/2024 at 12:49 AM, wuzzzer said:
I DJed a couple dances over the past few years doing that. I have Amazon Music Unlimited and I downloaded each song I was going to play in the highest format that was available. I connected a 1/8” to stereo RCA cable to my receiver. Worked great and sounded fantastic.
I listened at home first and was really impressed. I have no idea what DAC my laptop has. It can’t be that high end since it’s only a $300 HP laptop.
You shouldn’t need a pre-amp if you were connecting it directly to a power amp.
I gave a fantastic QuuckSilver pre sitting unused
My Holiday CD goes right to the Crown K2
-
Did this at least 20 years ago Used FLAC
-
Only caveat ..you do not want the Horn aimed right at your Ear. 🚫
- 2
-
What,I see from Class D.is they are fine up to rated power That's all you get without nasty sound
Tube amps can he pushed hard and still sound good
-
Done it for 20+ years.... FLAC Is your friend. 🙂
- 2
-
9 minutes ago, diamonddelts said:
I wonder if you can use a pair of big amps with the Heritage Jubilee? I was thinking 350 W per channel for the HF/MF and 500 watts per channel for the low end.
40 Watts more than sufficient for Mid/ High
-
On 2/27/2024 at 4:09 PM, OilyBoy said:
at this moment i drive my LF cabinets with a Hypex 500wpc class D amp, just did a comparrison with one of my Crown K2 amps but for now my impression was that the hypex has better low end and more punch.
for the 402`s i am switching between the First watt J2 and tubes. not sure what i like best yet.
both the J2 and the LM219IA are 25 watt amps.
i am a tube guy but you need a really really good tube amp to keep up with the J2.
will try my Mc275 on the horns next week, and after that a Sun Audio 2A3 from a friend of mine.
something in me doesnt want to part with tubes but the J2 is no nonsense and top sounding.
Really ??
Class D ...more better??
Shocking. 🙃
-
On 2/15/2024 at 1:25 AM, JohnA said:
I do think 2.1mm (12 American Wire Gauge) wire will be enough.
What amps and preamp are you using? Some people once thought long, especially balanced (3 wire microphone cables) and short speaker wires were the ultimate. Can you put your power amps on or behind your La Scala's and run long cables to them?
I use 3 pair twisted, then braided CAT 5e cables for speaker wire. They amount to about 2.3mm (10.5 AWG) wire. The insulation and all that braiding results in a low resistance, capacitance and inductance speaker cable. They are about 5 meters long. I could not hear a difference between old 12 AWG Monster cable and my homemade wires. But they look good!
I also failed a double-blind test at Klipsch HQ in Indy with similar cables many years ago. Klipsch said their braided CAT 5 was -3 dB at 300 kHz!
My bottom line is that when the resistance is low enough and inductance and capacitance are not significant, you have a good speaker cable. Buy a large diameter stranded wire and don't worry.
I can not hear 300kHz. ,. ,🙄
I am old, must be my hearing
Ixam happy with 12000 HZ
- 1
-
53 minutes ago, geezin' said:
Happy hour early tonight?
My phone speaks Ebonics
You should be familiar with that 😀😀😀
- 1
-
My Forte 2 we're my fav speakers many yeara
You be will enjoy your purchase. 🙂
- 1
- 1
-
I can not imagine any OB competing with Forte
No Bass reinforcement. 🙄
- 1
-
My experience has been most any Mav product
Perhaps I am mistaken, however I believe the DS units have a ,,"current clamp" to prevent damage
I have no idea at what level that kicks in. ..
-
MC. ~ McIntosh
They will take a beating. 🙂
-
-
Don't know if I posted on this I have both The KH certainly have a lot more bottom But The LS whacks you in the chest pretty good
- 1
-
It's what you find for sale close enough I am not a fan of the kid horn on the early speakers
You might investigate KLF 30
Mine are fantastic ...Using them instead of my KH. 🙂
-
More directed towards SS Tube equipment is more forgiving, no instant toast. ,😀😀😀
-
The problem is that low ohms increase s the Current draw
Causing the Output Devicrs to olver heat
- 2
-
Not convenient
But HiFi Lounge in Rochester NY
- 1
-
Perhaps of interest An acquaintancel https://youtu.be/sDwhTZTLc-Y?si=Sf5j4hoWHAGGcNVn
- 2
-
On 2/13/2024 at 8:19 PM, Peter P. said:
Well, you know all this drama about "consecutive serial numbers". Can't upset the sequence buy buying just one, so buy a pair and
throw one away. 😚
Fantastic Idea. 😀
-
My Forte 2 we're fantastic. 🙂
- 1
-
BTW I would insulate
that construction
Amp for Klipschorns
in 2-Channel Home Audio
Posted
Stotage !!;
Got Transients. Yep. 🙂