Search the Community
Showing results for tags '2channel'.
-
Big hello to all you KlipschManiacs out there, I've finally gotten my main 2 Channel system narrowed down and ready to really dial in. Currently the main system consists of Forte II's backed up with two REL T3 subwoofers to tackle and tighten the bottom end. They are driven by a Pass Aleph 30 (30 WPC) solid state amplifier connected with Soniquil speaker cables by Raven Audio and a Soniquil power cable to the amplifier section (plug #6) of an Audioquest Powerquest 2. For volume and switching duties I'm running a Classe' Audio Four Preamplifier to feed the Pass amp connected by Mogami Gold XLR's, connected to the Powerquest with a Cardas Cross power cable. For source components i have a Thorens TD 209, using Audioquest Evergreen RCA's (planning to upgrade) and Audioquest Saturn Ground Goody's, to connect to a Parks Audio Puffin, in turn connected to the preamp with Audioquest Evergreen RCA's (another soon to be upgraded interconnect). The Thorens is provided power by the powerquest and the Puffin is fed power by Furman Equipment For a CD/SACD source i'm awaiting an OPPO BDP-93 from another forum member (I'M STOKED, as i missed out on the Oppo offerings of the last 10-15 years). And finally, to the main point of this post, for a streaming source I utilize an Audioengine B1 Bluetooth Reciever/DAC connected to the preamp with Morrow Audio MA2 RCA Interconnects plugged into Furman gear for EMI/RFI filtration and clean power. The resolution and quality that the Audioengine gives me from Amazon Music HD and Ultra HD is nothing short of incredible. If you are not using a lossless audio provider for streaming music, like Amazon HD or Tidal, even for a mid-fi set up like mine you are doing yourself a great disservice. The quality is jaw dropping compared to streaming using any regular service. To that end I would like to know what streaming recievers and DACS you guys have experience with, and if there are any truly HIFI audiophile bluetooth receivers that are decently priced, (not looking to spend 1500$ 10,000$ 280,000$ like some audiophile gear can be) so looking in the 50$-800$ range. Also maybe a separate DAC that could take my AE B1 to the next level? Does anyone have any experience with the IFI Zen Blue? What about the Bludento BLT-HD? Is there an obvious unit that everyone here already uses and I'm just late to the party and need to be "enlightened"? Being able to pull from such a massive library like amazon music is an incredible convenience and while it won't replace my buying/collecting vinyl and cd's it is quite the way to demo music and access music with ease. Welcome to the 21st Century audiophiles! Also any thoughts/upgrade advice/suggestions on my system set up would be nice. My secondary system is Klipsch KLF-30's on a Yaqin MC13S (40WPC tube integrated) that i am currently gathering source components for. Thanks Guys! Rooster-
- 28 replies
-
- 1
-
- 2channel
- 2 channel
-
(and 28 more)
Tagged with:
- 2channel
- 2 channel
- 2 channel stereo
- streaming
- bluetooth
- ifi
- ifi zen blue
- audiophile
- audio engine
- forte
- forte ii
- forte2
- rel
- rel sub
- rel t3
- pass amplifier
- classe audio
- classe preamplifier
- amazon hd
- amazon music hd
- tidal
- amazon music hd ultra
- audioengine b1
- dac
- hifi streaming
- bluetooth music reciever
- hi res
- mid fi
- bludento
- bludento blt-hd
-
So I'm a total noob and need some assistance from the community here... I've got the most basic setup possible, however I still can't figure out how to maximize my speaker's potential! I've recently acquired a set of RB-35 bookshelf speakers and have set them up to my VSX-822 receiver. The receiver is a 5.1 channel, however I only have these two speakers and my dad took back his DOGG floor speakers... Anyways, I currently have them Bi-wired (at least I think so?) to the L and R on the receiver. There are still 3 open ports for a center and 2 surround... The back of the RB-35s have dual binding posts. I'm currently at work but found this picture on Google that is exactly how I have mine setup currently: [see attached] So am I best off with this setup? The single wire essentially comes from the L output of the receiver, and splits to both binding posts on the speaker... Same for the R speaker. Or should I run a separate wire from the L to the bottom or top binding post, then a separate wire from the L surround to the bottom or top binding post? I figured that would be too much power to the speaker and damage my goods... Any help would be greatly appreciated! I can take better pictures when I get home if needed! Thanks guys! BTW, I know I probably need more speakers in my setup... I'm saving up for a Klipsch center, but just graduated college and money is tight right now so speakers are last on my list unfortunately
-
I believe this was Super Deans thread. Couldnt find it. Anyhow who still indulges in music or even tv, movies, the bug you hid in your neighbors living room in 2 channel? The way music/noise was/?is meant to be? Sure movies have music...hifi,midfi or lowfi music is for 2 channels! Even if be in the new Klipsch Earhorns? Anybody? Anyone? Or just me, yeah i thought so...