onemike Posted February 19, 2002 Share Posted February 19, 2002 Hello! I have an RC-3 and will soon receive my new KLF C-7. The former is biwireable but can you also do this with the C-7? And, if I choose not to go the biwireable way does it matter if I put the two speaker cables in the upper or the lower hookups. On my RC-3 I currently have the speaker cables hooked up to the upper inputs on the back of the speaker. Thanks. Mike Quote Link to comment Share on other sites More sharing options...
HornEd Posted February 19, 2002 Share Posted February 19, 2002 onemike, the KLF C7 has only one pair of connectors, not two like the rest of the Legends. On the other Legends, there is a gold-plated plate on the KLF-10, 20 & 30 that makes either set of contacts the same. To bi-wire a Legend, that plate must be removed. I hope the "little" Legend helps. HornEd ------------------ "LEADING 8 LEGENDS INTO THE 6.1 GENERATION!" FOREGROUND SOUND STAGE: KLF 30's: Left Main, Center Main, Right Main KLF C7's: L & R Front Effects on 5' sand filled columns BACKGROUND SOUND STAGE: KLF 30's: Left Surround, Rear Effects, Right Surround LARGE MOUTH BASS: Twin SVS CS-Ultra SubTower, Samson Megawatt Amp KLIPSCH SPEAKER SUPPORT SYSTEMS: Mitsubishi RPHD1080i 65", Yamaha RX-V3000 Receiver Toshiba Pro Scan 6200, Toshiba Pro 6-head SVHS W808 in search of the Eternal Tweak! Music Respite Room: Vintage Cornwall's in Transition Klipsched Class "A" Motorhome: On the road testing Quote Link to comment Share on other sites More sharing options...
onemike Posted February 19, 2002 Author Share Posted February 19, 2002 Thanks HornEd! Does it matter then if I on the RC-3 connect to the upper or lower inputs as I can? Mike Quote Link to comment Share on other sites More sharing options...
VideoGUY Posted February 19, 2002 Share Posted February 19, 2002 hopefully i understand you question correctly. but if you choose NOT to bi-wire the rc-3 and inten to only use one set of binding posts, you HAVE to have the connecting plates inserted so that the one set of posts still connects to the other. that way both the tweeter and the woofers get a signal. those plates act like a jumper...providing one signal for both posts instead of two seperate signals for both posts...hope that made sense... ------------------ Home Theater System Includes: ------------------- Sony STR-V444ES Fronts: RF-3 Center: RC-3II Rear: RS3-II Sun: KSW-12 (Fuse: SB 1.2A) TV: Sony WEGA 27" DVD: Sony (Model# ?) Quote Link to comment Share on other sites More sharing options...
M6 Driver Posted February 19, 2002 Share Posted February 19, 2002 VideoGuy Yep ya gotta have those in place if ya use the upper posts minus the jumper you'll feed the tweeter if ya use the lower posts mius the jumper you'll feed the woofers. Does that help? ------------------ "FULLY LOADED" J Quote Link to comment Share on other sites More sharing options...
boa12 Posted February 19, 2002 Share Posted February 19, 2002 one, w/ those gold jumpers on i've read & heard that the cable terms should be attached to the high posts. though on my rf-3 at one time I, instead of the gold jumpers, just stripped longer strands of bare wire & threaded from the bottom thru the top terminals (try doing that from top-to-bottom (very difficult & for me impossible)). made NO dif whatsoever to these ears, but i'd go w/ the high posts 1st if possible. ------------------ My Home Systems Page This message has been edited by boa12 on 02-19-2002 at 11:31 AM Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.