Heresy crossover E2 to E question

[tuned4life]

Thanks in advance for any help. Wondering if I got it right. I have hopefully converted a pair of E2 crossovers to E crossovers. With a stock E2 next to a stock E I noticed that the squawker connections were differant and the E2 had a capacitor bridging the woofer terminals. I removed the woofer capacitor. the #2 tap from the T2A connected to the E2 squawker positive terminal (#6). On the E the #2 tap connects to the squawker negitive (#5). I also noticed that the Black lead from T2A (#0 tap), connected differantly. It connected to the back side of the squawker positive terminal (#6) on the E network and to the squawker backside negitive terminal (#5) on the E2 croosover. To convert the E2 to E I installed the older oil cans. connected #2 tap to squaker negitive (#5) and #0 tap to backside sqauwker positive #6 terminal.

[tuned4life]

This hopefully is correct for E crossover. Backside of terminal block showing how I rerouted the black wire from the 0 tap from the T2A.

[tuned4life]

Just to clarify. I have 6 pairs of Heresy I's. A couple pairs of transition year Heresy I's had E2 crossovers with K53 mids on K701 plastic horns. I have replaced the K53's with K55V (soldiered terminals) on K 700 metal horns. I have also installed the older square magnet K 22 EF woofers. If I have converted the E2's to E's correctly I will replace the temporary oil cans with new 2.0 UF sonicaps.

[BEC]

The woofer inductor is also the wrong size. 4mH on the E-2 and 2.5mH on the E.

Bob Crites