need link to la scala bass bin build specs

[Dayzed50]

have been looking forever now. found lots of la scala bass bin build pics but i can't find a link to the build specs anywhere. building a shorter la scala center channel/tv stand and need the specs. any help would be awesome

[WMcD]

http://forums.klipsch.com/forums/p/96818/979211.aspx#979211

Please see the above. In the thread I posted what I think is Andy's measurements which he provided someplace else on the forum. I couldn't find his original post.

I've drawn these out full scale on paper and they are right on the money.

I will point out that there is a board at the top of the rear section of the top hat. If you look at the LS toward the rear, there is a board about two inches wide above where the mid driver appears (roughly). It is in the cross-section drawing but I don't see it in the bill of materials section. Or maybe I'm not reading it right.

When I was building horns, my procedure was to draw out the isometric views on paper. This really helps get an idea of what goes where and the dimensions. Even scale drawings help. Naturally I suggest you do the same -- but you know that, already, natch. It is part of the "measure twice, cut once" program. Like the tradition of sobriety in Denmark, it is honored mainly in the breach (to quote the Bard). Actually, I measure thrice, and still have to cut twice. Smile.

Wm McD.

[Dayzed50]

that's all the info i was looking for. thanks for the help, you rock

[billybobg]

I have the German mm drawing. All you needed was to ask:)