AJ Raines Posted January 11, 2011 Share Posted January 11, 2011 So sub has been intermittently functioning without any loss of signal to L/R. Low volumes are okay, but anything more than say 15% yields no bass. After browsing forums I purchased 4-pack of Radio Shack 270-1064. Attempting to remove fuse cover in what I thought was common sense quarter turns with gentle pressure (repeatedly) has resulted in... nothing. I thought hey... maybe those kids in China assembled the thread reversed... nope. (Guess a nickel a day is well-spent labor). So back to counterclockwise repeated attempts. even tried popping it out with 2 razor tips; failed. So apparently I'm not smarter than the fuse... any ideas would be appreciated. [:S] Quote Link to comment Share on other sites More sharing options...
Mister_Clean Posted January 11, 2011 Share Posted January 11, 2011 If I recall correctly you push in on center while turning it almost 180 degrees counter clockwise, it is spring loaded and should pop right out after that, but I doubt the fuse is your problem. typically a fuse like that is either good or bad and since it is a power fuse the system would work or not work. but by all means, check it out and let us know what you come up with. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.