2sick2pray Posted July 26, 2012 Share Posted July 26, 2012 I found a pair of K260 locally after trying for so long to find k400's for a Lascala build. Can I drive them with a single driver or do I need the manifold for the 4 driver setup? I'm thinking of building a Godscala on steroids with a bigger tweeter and a bigger maybe 18" bottom. Any ideas would be greatly appreciated. 2Sick2Dance Quote Link to comment Share on other sites More sharing options...
Guest " " Posted July 26, 2012 Share Posted July 26, 2012 you can drive them with a single 2" driver or use a 1" to 2" adapter to drive them with a single k-55 Quote Link to comment Share on other sites More sharing options...
LarryC Posted July 26, 2012 Share Posted July 26, 2012 What is the K-260 and what is it used in? Thanks-- Quote Link to comment Share on other sites More sharing options...
Guest " " Posted July 27, 2012 Share Posted July 27, 2012 What is the K-260 and what is it used in? Thanks-- its a mid horn used in the MCM1900, and possibly other Pro Pa gear. Its' about 3ft wide and 3ft deep. It supports either an alinco 2" driver or the aluminum casr quad k-55 manifold. I have a set and always wanted to make a pair of GodScala's using the horn and a KP-49 18" woofer. Quote Link to comment Share on other sites More sharing options...
2sick2pray Posted July 28, 2012 Author Share Posted July 28, 2012 Thank you speakerfritz as you have given me some new ideas.2s2p Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.