mungkiman Posted July 25, 2002 Share Posted July 25, 2002 JR, The grill cloth is attached to the grill frame. On the front of the motor board are 2 vertical 1/4" thick x 3/8" wide strips of plywood. They are 1/2" shorter than the height of the enclosure, and spaced 1/8" down from the top (3/8" up from the bottom), and 1/2" in from the edges. This should still allow access to the screws that secure the motor board to the enclosure. This also allows for a 1/4" thick piece (veneered ply) to fit between the grill frame and the motor board, concealing the base of the enclosure between the "legs". This 1/4" piece is also stapled to the grill frame. Good luck. Post pics! Chris Quote Link to comment Share on other sites More sharing options...
CaptnBob Posted July 26, 2002 Share Posted July 26, 2002 Yeah, what he said. Mine are set up the same way. Your horns and crossovers are on the way - you should have them by Monday. The crossover was mounted on the motorboard between the squawker horn and the woofer, with the barrier strip up, away from the woofer. (I'm not sure that matters, but I just thought I'd throw that in...) Capt'n Bob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.