masu Posted October 28, 2015 Share Posted October 28, 2015 Hello, I have an out of warranty X7i with 3-button remote. It’s not working so I’m going to attempt to replace the jack myself. Looking through this forum, the closest I can find to the wiring diagram is a post by remy on 8/12/15, however the colors on the X7i are a little different. Attached is my photo, from left to right (4 sets of channels): left: blue wire with nylon? left middle: copper right middle: blue and red wire with white insulation-copper wire right: reddish copper Deconstructing the original (I did accidentally cut some wires) it seems that: the white insulation-copper wire from the right middle is for the Left (?) the blue and red wire also from the right middle is for the Right (?) the copper from the left middle is for the Ground (?) and the blue wire from the left is for the Mic. (?) I’m not sure what the reddish copper wire on the right is for (?) Can someone kindly confirm, if this is correct. I thank you in advance! Quote Link to comment Share on other sites More sharing options...
masu Posted November 4, 2015 Author Share Posted November 4, 2015 Problem solved. Good as new! Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted November 4, 2015 Share Posted November 4, 2015 Glad you got it figured out. Welcome to the forum. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.