Daemon Posted August 23, 2002 Share Posted August 23, 2002 What is the proper positioning for the KT THX series? I didn't get the manuals with them, so I have nothing to refer to. My theatre room is 11' x 22', and I sit roughly in the middle. How much does the distance from the front and side walls matter? This room is narrow, so I don't have much room to play with. I'm planning to mount the fronts on the side wall, angled towards my listening position. I'm not sure about the dipolar surrounds. Should I mount them snug to the wall? I also have about 10' open behind me - will that change how effective they are or where I should place them? I've heard they should be beside you, 2 feet up from your ears? Of course, my main concern is the subwoofer, which I have in the front corner. How far should it be from the front and side walls to get an even frequency response? The volume dial goes from 1-10, but it has a THX mark just past 10. What is that for? (It's way to loud to be normal). Something else about the sub: It has 2 RCA input jacks, but any receiver I've seen only has a single sub-out. Should I use an RCA splitter and use both jacks, or which should I use? I've found if I use a splitter I get an annoying 60-Hz hum from the sub, but I don't get it when using a single input. Thanks in advance, Carl Quote Link to comment Share on other sites More sharing options...
T2K Posted August 24, 2002 Share Posted August 24, 2002 I have the original one page instructions that came with the THX speakers. It has a few pictures and simple setup instructions. If you'll e-mail me your address I'll snail mail you a copy. I also have a pair of Omnimount brackets for the KT-DS's unused in the box,if you're interested. Keith Quote Link to comment Share on other sites More sharing options...
mjjr1956 Posted November 1, 2009 Share Posted November 1, 2009 i picked a pair of the KT_DS speakers and wanted to mount them..saw on this old post you were familiar with them...where do i get the omni mounts.??? and if you still have the set up instructions>??? thank you , Montfort Quote Link to comment Share on other sites More sharing options...
T2K Posted November 1, 2009 Share Posted November 1, 2009 I still have the unused mounts in the box packed away in the closet, with screws. I bought them many years ago and I don't think they are still available. If you are intrested in them I'll see if I can find the receipt, I have no idea what I paid for them. I'll look for setup instructions. It may take a few days as I work alot. If I remember correctly they were supposed to be mounted at a 90 degree angle to the seating position with the drivers pointed to the front and rear. That puts the listener in null. Quote Link to comment Share on other sites More sharing options...
T2K Posted November 7, 2009 Share Posted November 7, 2009 http://community.klipsch.com/forums/p/29805/1163500.aspx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.