Vivek Posted October 17, 2017 Share Posted October 17, 2017 HI, I have Yamaha RN-602 Amp. The specs are Minimum RMS power - 80 W + 80 W (8 ohms, 20 Hz - 20 kHz, 0.04% THD) Maximum Power(8 ohms, 1 kHz, 10% THD) - 115 W +115 W High Dynamic Power / Channel (8 / 6 / 4 / 2 ohms) - 105 / 125 / 150 / 178 W I want to pair RP 280F with this amp for stereo music only. Will this amp be able to drive the speakers for good performance?? Thanks Quote Link to comment Share on other sites More sharing options...
willland Posted October 17, 2017 Share Posted October 17, 2017 Yes I believe so. I have often considered this receiver myself. Bill Quote Link to comment Share on other sites More sharing options...
Vivek Posted October 17, 2017 Author Share Posted October 17, 2017 Thanks Bill. If I may some more detailed opinions probably of somebody who has used these or similar. Thanks Quote Link to comment Share on other sites More sharing options...
willland Posted October 17, 2017 Share Posted October 17, 2017 Just now, Vivek said: Thanks Bill. If I may some more detailed opinions probably of somebody who has used these or similar. Thanks I have not used any of the Yamaha stereo receivers but do own the Yamaha A-S1000 integrated and it is a beast. A different animal than the R-N602 no doubt. With that said, Yamaha stereo receivers are built pretty robust, weighing in more than some other brands 7+ channel AVRs. I do think there are a couple of forum members who are using the 602 or the previous model R-N500. Maybe they will chime in. Bill Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.