Jump to content

Humming noise on HSU VTF-2


Fordman

Recommended Posts

I just picked up a VTF-2(awesome sub)and I have a problem with it.When I plug in my sub cable it has a hum to it.When I switch it from internal x-over to external x-over it gets really bad.The first thing I tried was a new cable but that didnt work.When I pull out the sub cable from the back of my reciever and touch the cable with my finger it makes the sub hum.I dont know what else to try.Any suggestions?8.gif

Link to comment
Share on other sites

The hum you hear when you touch the signal cable is normal,any powered sub will buzz(hum)when the sub is powerd and the gain is over zero and you touch the conector.

Does your sub buzz when no cable is coinected,just the sub powered?

When the cable is conected,and does not conect to your receiver sub out,does it buzz?

Link to comment
Share on other sites

sounds like a ground loop. just go to the hardware store & get an adapter for like 70 cents that

makes the 3 prong into a 2 (removes the safety ground). or do a search on here for "ground loop" for more info.

btw, do you also have cable or dbs tv connected to your sys in some way?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...