redstarjedi Posted June 6, 2021 Share Posted June 6, 2021 For sale is a restored yamaha pc-1002 power amplifier. The following were done: On the electrolytic capacitor board, I changed the 30+ year old capacitors with the best quality Nichicon Fine Gold Capacitors. About 17 or so in total. The main two power/filter capacitors measured well so I kept them in. I also changed a few of the film capacitors too. Bias and Idle Current was set to factory specifications. I re-soldered a few bad looking solder joints. This is an excellent amplifier for home or professional use. At home in stereo mode it offers 100 watts effortlessly. It has that typical yamaha sound - clean, transparent, and uncolored. The bass, midrange, and high frequencies are excellent. Pair this with a solid pre-amp or a decent DAC and you are set. I can demonstrate it in stereo mode. For professional use, this can be switched to mono to pump out 300 watts! Yes, 300 watts. If you are a DJ or a stage musician this is also the amp for you. Cosmetically it’s a bit dirty, but if all you care about is sound it’s 100% functional. Also has balanced XLRs This is my Ad: https://losangeles.craigslist.org/lac/ele/d/glendale-yamaha-power-amplifier-pc-1002/7331940288.html I'm in Glendale, California (los angeles), and I'm willing to work out a deal with anyone. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.