imeiamme Posted June 8 Share Posted June 8 O.K. I get to assemble a system using the ROCKVILLE - RCS80-1 a 70Volt 60 Watt system at 8 ohms. The space is commercial for garments and polished rocks, etc. The system will consist of Two K-101 Horn Tweeters, One K-110A TRACKTRIC Horn Tweeter, Two 2.7 kHz KLIPSCH Crossovers., and an RC-52C Speaker. what is not present is what will be required to round out the space and complete the 70Volt chain. That would be at least one Midrange Horn and one more center console type. space is maybe 40 x 15. Or 600sq. Ft. Anticipating 12 Gauge speaker cable. Anticipate connections on rear of Rockville RCS80 as being too thick a cable. Will use ‘U’ shape connectors for rear panel connections. 3 zones zone 1 - RC-52C with a second similar system zone 2 Tweeters zone 3 Midrange alternate set-up zone 1 front store (RC-52C and 1 tweeter zone 2 back of store Tweeter and eventually a second Similar RC-52C and midrange zone 3 middle, which includes dressing rooms, Tweeter and eventual midrange issue being. If Crossovers ar set on the line there will require junctions separating the tweeter crossover to midrange. Perhaps, I’m viewing this incorrectly. I’ve worked with crossovers before MUSYSIC MU-CO4W PROFESSIONAL 2/3/4-WAY AUDIO STEREO SOUND PROCESSING CROSSOVER. Different type. but, the speaker cable must be formed to a connection. That connection inserted into the crossover port. The connections exiting the crossover are then the connections that scale down to 16 or 18 gauge speaker cable going to the tweeter, or midrange units. Basically, left an righ wall ion top display shelves. Opposing eachother with an eventual and final KLIPSCH RC-52C on back wall to cut the middle providing bass. as I understand it. The crossovers will continue the series as it is jumped in at the first tweeter in a series that connects the second. With no disruption from the midrange connected simultaneously to the same crossover from the appropriate connection for mid. Quote Link to comment Share on other sites More sharing options...
imeiamme Posted June 8 Author Share Posted June 8 My branches wil go left first near cash register and door zone 1 RC52C (Right wall), CROSSOVER 2.7khz, Tweeter K-110A TRACCKTRIX and eventual Midrange. (Left wall) zone two going right Second (eventual) RC-52C (Back wall Bass) *(almost 50 ft.) zone 3 (Left wall middle of store from the right longest path almost 70ft.) - CROSSOVER 2.7khz K-110A tweeter, TrackTrix and eventual Mid Quote Link to comment Share on other sites More sharing options...
imeiamme Posted June 8 Author Share Posted June 8 Quote Link to comment Share on other sites More sharing options...
imeiamme Posted June 8 Author Share Posted June 8 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.