reactor444 Posted July 3, 2003 Share Posted July 3, 2003 I have finally got around to hooking up my surround system but unfortunately am having trouble with my center channel hookup. When selecting sound levels for each of the channels, every channel comes up on the AVR5800 display except for the center channel mode..Any of you Denon owners have any ideas?? The center channel is hooked up but no sound... Thanks Art Quote Link to comment Share on other sites More sharing options...
easylistener Posted July 3, 2003 Share Posted July 3, 2003 Sounds like you have the center in phatom mode. Take it and put it in cinima mode. Quote Link to comment Share on other sites More sharing options...
reactor444 Posted July 3, 2003 Author Share Posted July 3, 2003 Just put it in Cinema mode and I still get every channel display except the center..I hope it's something simple.. Quote Link to comment Share on other sites More sharing options...
dougdrake Posted July 3, 2003 Share Posted July 3, 2003 Did you tell it you have a center channel speaker? DD Quote Link to comment Share on other sites More sharing options...
KhornKerry Posted July 3, 2003 Share Posted July 3, 2003 Go to the system setup mode and see if it is set to CENTER SPEAKER OFF. This is were you select speaker size, sub or no sub. Quote Link to comment Share on other sites More sharing options...
reactor444 Posted July 3, 2003 Author Share Posted July 3, 2003 This beast is just too complicated..The manual isn't helping and the Atkis remote is not the easiest thing to manouvere..It's probably something simple I hope..How do I "tell it" that I am using a center channel?? Quote Link to comment Share on other sites More sharing options...
KhornKerry Posted July 3, 2003 Share Posted July 3, 2003 I think the system setup is one of the menu button selections. Quote Link to comment Share on other sites More sharing options...
reactor444 Posted July 3, 2003 Author Share Posted July 3, 2003 Khorn Kerry I was adjusting the levels on the receiver itself as I could not get the on screen menu to appear on the tv....Is there a way to do it manually?? I bet the center channel is turned off like you indicated.... Quote Link to comment Share on other sites More sharing options...
KhornKerry Posted July 3, 2003 Share Posted July 3, 2003 If it is like my denon the TV screen menu only works with the S video input to you TV. Quote Link to comment Share on other sites More sharing options...
reactor444 Posted July 3, 2003 Author Share Posted July 3, 2003 Do you need the tv menu to set up the channels?? Quote Link to comment Share on other sites More sharing options...
KhornKerry Posted July 3, 2003 Share Posted July 3, 2003 It makes life much easer if you can see the Denon menu on the TV. Make sure the TV is set to the same S video input as the Denon is plugged into. I have to signoff now have a happy 4th. Quote Link to comment Share on other sites More sharing options...
reactor444 Posted July 5, 2003 Author Share Posted July 5, 2003 Thanks for all the help the other night. I reset the memory on the Denon and every thing worked after that..Center channel must have been turned off..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.