sfogg Posted December 29, 2003 Share Posted December 29, 2003 Since converting my La Scala's to 2 way speakers using Al K's ES600s I have a fair amount of parts available. A pair of ALKs Type 'A' crossovers that I built. The circuit is the same as Al's using the same parts Al specifys however they layout of the components is a little different making them an easier fit in La Scala's. They should be able to be used in a Belle or K'Horn but I don't know how the fitment would be. Note they fit on the right side (when viewed from the rear) of the La Scala's so you don't need to remove your factory crossover. The critical coil/transformer positioning is the same as Al's. These are not bi-wireable, instead they have selectable tweeter protection using a poly-switch like later Klipsch crossovers. The tweeter protection can be in the circuit or bypassed completely just by using a different lug on the barrier strip for the tweeters positive wire. $250. I also have a lot of Klipsch parts available. (2) K55Vs spring clip alinco squaker $200 (2) K55M mud squaker $200 (2) K77M mud tweeter $150 (1) K77 alinco tweeter $75 (3) K400 metal horn ???? (2) AL crossovers ???? (1) AA crossover oil cap type ???? All prices plus shipping. E-mail me at sfogg@attglobal.net for more info. Thanks, Shawn Quote Link to comment Share on other sites More sharing options...
3dzapper Posted December 29, 2003 Share Posted December 29, 2003 Shawn if that's 250 for the pair of ALKs, I'll take them. Rick Quote Link to comment Share on other sites More sharing options...
sfogg Posted December 29, 2003 Author Share Posted December 29, 2003 Rick, Yes, that is for the pair. They are yours, thanks. Shawn Quote Link to comment Share on other sites More sharing options...
mopar dave Posted December 29, 2003 Share Posted December 29, 2003 sfogg, you have mail. dave Quote Link to comment Share on other sites More sharing options...
sfogg Posted December 29, 2003 Author Share Posted December 29, 2003 Hi Dave, I don't have an e-mail from you yet but I've been having some problems with that account and e-mail delays.. Try s_fogg@comcast.net instead. Sorry about that. Shawn Quote Link to comment Share on other sites More sharing options...
mopar dave Posted December 29, 2003 Share Posted December 29, 2003 ok, i will try again. interested in lascala parts. Quote Link to comment Share on other sites More sharing options...
mopar dave Posted December 29, 2003 Share Posted December 29, 2003 sfogg you have mail. if this does'nt work i'll send you a pm. dave Quote Link to comment Share on other sites More sharing options...
mopar dave Posted December 29, 2003 Share Posted December 29, 2003 sfogg, i sent you a pm. Quote Link to comment Share on other sites More sharing options...
sfogg Posted December 29, 2003 Author Share Posted December 29, 2003 UPDATE: Looks like the ALKs, K55Ms, K77Ms and two of the K400s are spoken for. Thanks guys, Shawn Quote Link to comment Share on other sites More sharing options...
sfogg Posted January 1, 2004 Author Share Posted January 1, 2004 All the K400s are spoken for, thanks. EDIT: Since there was no interest on the K55V or AL crossovers I listed them on e-bay. Quote Link to comment Share on other sites More sharing options...
Kevmosmith Posted January 13, 2004 Share Posted January 13, 2004 Shawn, How much are you asking for the AL crossovers (pair)? (Assuming they are in good condition and working properly.) Thanks Kevin Quote Link to comment Share on other sites More sharing options...
sfogg Posted January 13, 2004 Author Share Posted January 13, 2004 Hi Kevin, Sorry, the ALs were sold on e-bay. All I have left now is one AA and an Alinco K77. Thanks, Shawn Quote Link to comment Share on other sites More sharing options...
louis Posted January 13, 2004 Share Posted January 13, 2004 i have pair of al on ebay now klipsch lascala ending today Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.