John Jay Posted July 3, 2001 Share Posted July 3, 2001 I need some help in selecting Klipsch Surround Speakers for my set-up: Aragon SoundStage Pre-Amp Surround Processor (Used for Mains>KLF-30, Center>KLF-C7 & Rears>?Lexicon DC-2 Pre-Amp Surround Processor (Used for the Sides(currently being used w/Cambridge also} I want to Buy 4 New Surround Speakers for the Rears & Sides, Which Model's would Match The KLF-30's and KLF-C7. Do I buy 4 RB-3's? or 1 Pair RB-3 & 1 Pair RS-7? Another Pair of KLF-30's won't fit in my Current Room at the moment. Thank You for Your Invaluable Time, Understanding, and Support. John Quote Link to comment Share on other sites More sharing options...
maverick Posted July 4, 2001 Share Posted July 4, 2001 If I was buying, it would be 2 pair of RS-7. I would stick with 4 of the same for the surrounds. Good Luck Quote Link to comment Share on other sites More sharing options...
htxpert Posted July 4, 2001 Share Posted July 4, 2001 Hi John I dont understand why you are using 2 Ht pre amps but I will take a crack at helping you with a setup with the Lex DC-2 I am taking for granted that you have installed the latest version 4.0 for the Lex DC-2 ? If so this is what I would do if you have the room KLF 30 upfront KLF C-7 center RS-7 sides RB-5 or RB-3 rears now if you use the BE (Bass Enhance) feature you may also want to use a ksw12 or ksw15 at either side below the RS-7's The DC-2 has good bass management and the BE is very good.I think you will find this system to be exceptional in conjuction with the DC-2 in Logic 7 mode.The RS-7's should be mounted at the null of the listening position,about 2-3 feet above the seated ear level.The RB-5 or RB-3 a direct radiator should be at the same height as the sides,and not to close to opposing side walls.The idea here is to keep the 2 sides and 2 rears the same height.This will make pans from RS-RR-LR-LS in Logic 7 mode or THX EX mode seemless.It will also give you a huge rear sound stage that is quite ambient and non directional when it needs to be.I am not a big fan of using 2 sides mounted in the null up high (Were they need to be) inconjuction with a floor stander in the rear with DC-1.DC-2 or the MC-1 I have never been able to get them to sound quite right this way.I may be wrong and would love to hear others who have tryed this Hope this helps Ray Quote Link to comment Share on other sites More sharing options...
htxpert Posted July 4, 2001 Share Posted July 4, 2001 Hi PS I would not recommend using 2 pairs of RS-7 for the sides and the rears.I think you do better with RS-7 on the sides and a direct radiator on the rear.The RS-7 is a WDST type speaker having 4 of them 2 on the sides and 2 on the rear could infact ruin your channel seperation It would be almost too ambient.I belive Lexicon and most other 7.1 preamps recommend a direct radiator on the rear.The THX spec for the EX Channel is also for a direct radiator.This is to simulate a rear center image from 2 direct radiators cheers Ray Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.