HOW DO YOU TURN OFF "NEO 6" ON A DENON?

[KhornKerry]

So did you get the receicer out of NEO-6?

<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />

My Denon receiver came with a seperate sheet with codes for most brands of TVs and DVD players. You can also go the the Denon web site and download a pdf file for your receiver and remote.

http://www.usa.denon.com/

Also my Denon remote can learn codes from any remote but this is not easy to do.

-------- --------- ----------- -------

To get DTS 5.1or 6.1 and Dolby Digital (DD)5.1 on a Denon AVR-3801

1) First you will need to be able to see the On Screen Display (OSD) on the TV monitor

The AVR 3801 OSD depends on which Video inputs are used. If there is no video on both of the Video signal input jack (yellow) and the S-Video signal input jack there will be OSD on both the Video Monitor Out (yellow) and S-Video monitor Out.

Connect one of the above Video outputs to your TV video in.

Make sure there is NO Video input signal to the receiver aT this time.

2) You will need to connect cables from the DVD to the Denon AVR-3801 for the Digital audio in for DD5.1 or DTS 5.1.

The Denon AVR-3801 has 3 Digital in Assignments for this: Coaxial 1 or Optical 1, Optical 2, Optical 3. It does not matter which input connector you use, the coaxial is cheaper and works fine.

3) You will need to select which (Digital in Assignment) you want for the DVD player.

On the Denon remote push the Setup button, scroll down and select "Digital in Assignment" if using a coaxial cable select "Coaxial 1" If optical cable is used select Optical 1,or Optical 2, or Optical 3. Make sure the input you select in the (Digital in Assignment) menu is the same as the cable that is plugged into the DVD player.

Also while in the SETUP menu make sure the ON SCREEN DISPLAY is selected and ON.

On the Denon remote push the MENU/OSD button to check the settings NOTE this toggles through several screens so you can check settings but will not allow you to change any thing.

Go to OSD-6 to make sure the digital assignments are correct.

4) For DTS 5.1 or 6.1 you will need to select DTS on the DVD PLAYER MENU. NOTE: the previews on a DVD may only be Prologic so make sure the movie has started.

Also make sure the DVD Movie you select has a DTS 5.1 or 6.1 sound track. Most movies do not have a DTS surround track.

5) Set the receiver to AUTO for decoding the type of sound.

On the receiver front push the AUTO button under ----INPUT----

6) The DTS led on the Denon receiver should now be on.