Aggie Klipsch Posted February 3, 2005 Share Posted February 3, 2005 I have an old SW8II that I am going to be adding to my center channel. At one time I had this done but forgot how to do this. Do you use the center out on the RCVR to the sub then the speaker output to the center channel. This was what I thought I did the first time before I moved. THX Quote Link to comment Share on other sites More sharing options...
gcoker Posted February 3, 2005 Share Posted February 3, 2005 Not exactly sure what you meen by adding it to the center channel. I had an SW-8II and ran the left and right main speaker wires out from the receiver to the sub. Then out from the sub to the front speakers. If you are wanting to run it from the center channel speaker I guess you can but why? Quote Link to comment Share on other sites More sharing options...
Aggie Klipsch Posted February 4, 2005 Author Share Posted February 4, 2005 You will not believe how much a center sub will add to dialog and SFX. I hooked it up last night and it made a tremendous difference in the overall presence of an action movie. It will be interesting to see how regular TV will sound. I would recommend this to anyone that has a spare sub lying around. Quote Link to comment Share on other sites More sharing options...
gcoker Posted February 4, 2005 Share Posted February 4, 2005 So I take it your running you center speaker wire into your sub then out to your center channel. I guess this will fill out your center if it needs it. Quote Link to comment Share on other sites More sharing options...
Aggie Klipsch Posted February 4, 2005 Author Share Posted February 4, 2005 That is exactly what I did. It makes the center more full. I was surprised by how much bass info is coming through. I set the center to large and ran the cutoff at 80 Hz through the sub. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.