Guest " " Posted February 26, 2007 Share Posted February 26, 2007 I'll start a seperate thread and post the link and schmatics tonight...the info is on my home computer. Quote Link to comment Share on other sites More sharing options...
thoppa Posted March 17, 2007 Share Posted March 17, 2007 So if you wanna dump the xo in your RF52 and move it to the line level side of your amp, to get a much improved speaker, here are the components I am using : For the HF channel 0.267uF (0.22 and 0.047 in parallel) and 520 ohm resistor , then a 0.0075uF with the 20K ohm amp input resistance For the LF channel 75 ohm and 2.2uF cap, then 330 ohm and 0.47uF cap. At the power level, the tweeter has a 3.3uF cap and an L-pad attentuator that uses a 3.3 ohm in series and a 47 ohm in parallel. The resistors are Riken Ohm and the caps are either Sonicap, Multicap or Mundorf M-Cap silver/oil so it sounds really very good indeed. I thoroughly recommend buying the best components you can afford as this seems to be critical in a pllxo. They can be tricky little buggers to get spot on. Anyway, the values would make a good starting point from which you can get the sound balance you want. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.