Jump to content

Yamaha HTR-5590 for sale. Mint in Box.


Darien

Recommended Posts

Thats right guys I can furnish pictures upon request and is available for pick up and inspection in either South Eastern New Hampshire or Central/ Southern New Jersey. Also will ship for actual shipping to anywhere in the US.

$300 bucks plus shipping if applicable

Link to comment
Share on other sites

i think he was trying to help by posting a link to details on the Receiver, but here they are. I pulled them off Amazon, There are a few reviews of it on Amazon also.

Technical Details


AM-FM tuner: Yes

Bass management: No

Dolby Digital decoder: Yes

DTS decoder: Yes

Dolby Pro Logic decoder: Yes

Dolby Pro Logic II decoder: Yes

Simulated surround sound: Yes (including Virtual Cinema DSP and Silent Cinema, for headphone listening)

DSP sound fields: Yamaha Quad-Field CINEMA DSP renders Dolby Digital EX and DTS-ES Matrix 6.1 sound formats in the Phantom mode (using 5.1 channels); 25 DSP surround programs with 45 surround environment variations

Audio DAC: 192 kHz, 24 bits resolution

Audio chip: Yamaha's exclusive YSS-938 32-bit floating-point-quantization LSI

5.1 channel input: Yes

Digital outputs: 2

Digital inputs: 7

Front power per channel (surround mode): 100 watts (20 to 20,000 Hz, 0.04 percent THD into 8 ohms)

Rear power per channel: 100 watts (20 to 20,000 Hz, 0.04 percent THD into 8 ohms)

Dynamic Power per Channel: MAIN, 8/6/4/2 ohms: 140/170/205/245 watts

Dynamic Headroom: 8 ohms: 1.4 dB

Damping Factor: MAIN L/R, 20Hz-20kHz, 8 ohms: 80 or more (linear)

Input Sensitivity/Impedance: Phono (moving-magnet): 2.5 mV/47 kohms; CD, etc.: 150 mV/47 kohms

Maximum Input Signal Level: 2.2 volts (Effect on)

Output Level/Impedance: SUBWOOFER (EFFECT OFF, MAIN SP:SMALL), mono: 4V/1.2 kohms

Headphone output/impedance: CD, etc. (40 mV, 8 ohms): 150 mV/100 ohms

ToP-ART construction: Yes

Power transistors: Discrete

Volume control: Digitally regulated for all channels (adjustments can be made by turning the knob on the receiver or through the remote keypad)

Speaker terminals: 5-way binding posts

Speaker sets: 2 (A, B)

Headphone Jack Rated Output/Impedance: 40 mV, 8 ohms: 340 mV/560 ohms

Frequency response (amplifier): 10 to 100 kHz, +/-3 dB

Bass boost/cut: +/-10 dB (50 Hz), turnover frequency: 350 Hz

Treble boost/cut: +/-10 dB (20 kHz), turnover frequency: 3.50 kHz

Direct button: Yes (processor direct switching shortens the signal path, feeding the pure, robust signal directly to the out put for cleaner, more efficient operation and higher quality sound)

Low-impedance drive capability: Yes

Impedance switching: Yes (amplifier can set for either 4- or 8- ohm speakers)

Filter characteristics: Subwoofer out, LPF: fc=90 Hz, 18 dB/octave; main, center, rear small speaker, HPF: fc=90 Hz, 12 dB/octave

Sleep timer: Yes (up to two hours in 30 minute increments)

Headphone jack: Yes (.25-inch)

Multiroom control: Yes (using Zone 2 feature)

MP3 decoding: No

HDCD decoding: No

Remote control: Yes (universal, with preset codes for other manufacturers and learning ability; the receiver responds to extended I/R codes)

Auto priority input selection: Yes

Front-panel AV inputs: Yes (including 1 S-video and 1 optical digital-audio input)

AC outlets: 2

Audio inputs: 11 stereo analog (left/right, including 1 phono input and 1 set of multichannel inputs), 7 digital (2 coaxial, 5 optical)

Phono input: Yes

Audio outputs: 4 stereo analog (left/right), 2 optical digital-audio, 1 dedicated subwoofer output (monaural RCA)

Composite-video inputs: 5

Composite-video outputs: 3

Stereo wattage per channel: 100

S-video inputs: 4

S-video outputs: 3

Component-video inputs: 2

Component-video outputs: 1

Video conversion: S-video to composite-video (for use with monitor output)

Total harmonic distortion: .06 percent

Signal-to-noise ratio: IHF-A-Network, effects off: 100 dB

Residual noise: IHF-A-Network: main, speakers out: 150 uV

Channel separation: CD, etc. (Input 5.1 kohm, Shorted, 10 kHz): 45 dB; CD, etc (Input 5.1kohm, Shorted, 1 kHz): 60 dB; in both cases with vol. -30 dB, effect off

Radio station presets: 40 (can be grouped in 5 groups 8 stations)

Multichannel ready: Yes

Preamp: Preamp output for all channels

Video signal type: NTSC

Composite-video signal level: 1 Vp-p/75 ohms

S-video signal level: Y: 1 Vp-p/75 ohms, C: 0.286 Vp-p/75 ohms

Component-video signal level: Y: 1 Vp-p/75 ohms; Cb/Cr: 0.7V/75 ohms

Video maximum input level: 1.5 Vp-p

Video Signal-to-Noise Ratio: 50 dB

Monitor output frequency response: 5 Hz to 10 MHz, -3 dB (composite- and S-video); DC to 60 MHz, -3 dB (component-video)

Tuning range: FM: 87.5 to 107.9 MHz; AM: 530 to 1,710 kHz

50 dB Quieting Sensitivity (IHF, 75): Mono (1 kHz, 100 percent Mod): 2.0 uV (17.3 dBf); Stereo (1 kHz, 100 percent Mod): 25 uV (39.2 dBf)

Selectivity (400 kHz): 70 dB

Signal-to-noise ratio (tuner): FM: Mono/Stereo (IHF): 76/70 dB; AM: 52 dB

Harmonic Distortion (tuner): Mono/Stereo (1 kHz): 0.2./0.3 percent

Stereo separation (tuner): 45 dB (at 1 kHz)

Frequency response (tuner): +0.5/-2.0 dB (20 Hz to 15 kHz)

Output level (tuner): FM: 550 mV (FM 100 percent Mod. 1 kHz); AM: 150 mV (AM 30 percent Mod. 1 kHz)

Antenna input: 75 ohms, unbalanced

Usable sensitivity (tuner): AM: 300 uV/m

Antenna: AM: Loop Antenna

Power input: AC 120V, 60 Hz

Power consumption: 400 watts (standby: 1 watt or less)

Item width: 17.125 inches

Item height: 6.75 inches

Item depth: 17 inches

Item weight: 33 pounds

Warranty: 2 years parts and labor

In the Box: Receiver, remote control, remote batteries, FM wire antenna, AM loop antenna, and a user's manual
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...