EdmundGTP Posted April 29, 2008 Share Posted April 29, 2008 I just recently became the owner of some "minty" KSP-400s and I was just curious if there were some well known/proven tweaks or upgrades that can improve the performance of these? Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Guest BobG Posted April 29, 2008 Share Posted April 29, 2008 Check all the screws that hold in the drivers, especially on the side-mounted subs. Snug them all but don't overtighten to the point of stripping the screws. If yours make noise or hum, there were some mods to correct. Quote Link to comment Share on other sites More sharing options...
EdmundGTP Posted April 29, 2008 Author Share Posted April 29, 2008 Ahh, that is a good idea; to check all the fasteners. When I initially hooked them up they had a bit of the infamous ground loop hum, but that was an obvious easy fix. I think I read something somewhere about opening up the back panel and zip-tieing some wires out of the way of some other ones? Though I'm guessing that's something that wouldnt be necessary if they speakers are otherwise performing perfectly. On a sidenote: does anyone know roughly how many sets of these speakers were made between 97 and 99? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.