Jump to content

willland

Heritage Members
 View Profile  See their activity

  • Posts

    11697

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Posts posted by willland

    Zone 2 with Amp and RF-63's

    in 2-Channel Home Audio

    Posted

    I have an Onkyo TX-SR705 with zone 2 connections. I want to use the zone 2 rca connections and connect to my amp and then to the other binding posts on the RF-63's. With the jumpers in place, is it possible(recommended) to have both sets of posts connected at the same time and switch from zone 1 (5.1) to zone 2 (2-channel only)? I want to use the amp for 2-channel only. When I tried this configuration once and switched to zone 2, I think it looped back and the receiver went into protection mode(switched off). Is this a crazy thing to do? If so please suggest an alternative.

    Thanks,

    Bill

    This post is on Tech forum also. More exposure.

    Zone 2 with Amp and RF-63's

    in Technical/Restorations

    Posted

    I have an Onkyo TX-SR705 with zone 2 connections. I want to use the zone 2 rca connections and connect to my amp and then to the other binding posts on the RF-63's. With the jumpers in place, is it possible(recommended) to have both sets of posts connected at the same time and switch from zone 1 (5.1) to zone 2 (2-channel only)? I want to use the amp for 2-channel only. When I tried this configuration once and switched to zone 2, I think it looped back and the receiver went into protection mode(switched off). Is this a crazy thing to do? If so please suggest an alternative.

    Thanks,

    Bill

    Yamaha

    in Home Theater

    Posted

    I second the motion. My Toshiba HD-A30 upconverts SD's as well or better than most BD players and definitely better than most of the SD players out there. For 75 to 125 dollars you can't beat it. An OK upconverting SD player will run you 75 to 125 dollars. By the way, it plays HD-DVD's. Dead format maybe, but the disks can still be bought online for 8 to 15 dollars.

    Bill

    Enough Power?

    in Home Theater

    Posted

    Amazon.com $513.23 free shipping, Onecall.com $519.00, Accessories4less.com 439.99 (factory reconditioned w/Onkyo warranty). If your budget will allow, step up even higher to the 805(130w,Burr-Brown DACs,dual push-pull amp,THX Ultra2). Probably the best bang for the buck out there($579.00 to $700.00).

    Bill

    Enough Power?

    in Home Theater

    Posted

    Yes the 576 with 90w is enough power to do the job. My suggestion if you have not purchased it yet, get the 705. It can be found for 425 to 525 dollars. Not much more than the 576 and with pre-outs if you want to add an external amp later for more power.

    Bill

    Pet Peeve

    in Home Theater

    Posted

    I know this sounds simple, but tell them. If they are really your friends they will respect your wishes. If that won't work steer them toward the kitchen where most gather anyway. Food and beverages usually has a way of distracting people from other things. Let them also know that if the kids can't eat and drink in the family room neither can they(you know setting an example). If all fails, put radioactive placards on each speaker.

    Bill

    Refrence Series Query

    in Technical/Restorations

    Posted

    To answer part of your post, yes the Onkyo TX-SR705 will have no problem driving your setup. Remember Klipsch speakers are very efficient. Even 75w wouldn't struggle. If you look at my setup, I have a 705(100w) driving the RC-62(150w),RF-63's(175w) and RSX-4's(50w). I wouldn't worry about the mis-matched wattage. I bought the amp(200w) for a little extra oomph, and for a cheap price($100.00). As for as bi-amping, I'm not sure. If you feel that you just need more, buy an inexpensive used amp. I also will eventually replace the surrounds with RS-52's.

    Bill

    New here.

    in Home Theater

    Posted

    I know you are saving for the house(I know all about that first hand). Just wanted to point out something that is semi-local, often times sellers are willing to be very flexible on the price when the buyer is willing to pick up so they don't have to go through the trouble of packing and shipping. That is how I bought my RF-63's. He said if he didn't have to ship he would knock another $100.00 off price($1000.00 delivered in person to my house).

    Bill

    rf82 + .......

    in Technical/Restorations

    Posted

    Buy the RF-82's and RW-12d sub but not the synergy series with reference series. If short cash flow prevents you from voice matching the whole setup, buy the RC-62($375.00-$450.00) center and wait on the rear surrounds until your budget allows. You should be able to find the RS-42's for about $400.00/pair. The left-center-right is most important in home theater(seamless flow from left to right). The synergy series C2 and (4) S2's would still cost you about $950.00. Ditch the extra surrounds for now and have an all 5.1 reference setup. Then when your budget allows and you still want 7.1, buy the rears.

    Bill

    Can I use my Onkyo 705 with an Emotiva Amplifier

    in Home Theater

    Posted

    Yes to the first part of question. No to the second part unless you need more bells and whistles than the 705 provides. Everything is relative. Spend more money on a receiver you get better amps,power supply,more b's & w's. The 705 provides a lot of bang for the buck. I personally came to the same crossroad and decided to buy a used B&K reference 4430 3 channel amp(200w). All I wanted and needed was more "clean" power to run my RF-63's and RC-62 and I got it for only $195.00. If you are happy with the 705(I love mine) then look on www.audiogon.com to find many quality amps for a fraction of what you would pay for a better quality receiver. Remember with an additional amp you will need more shelf space.

    Bill

    Good Setup?

    in Home Theater

    Posted

    I will have to agree with Youthman in his suggestion of you getting the RC-62.

    If you are shopping at BB/Mag*****, they now carry the 62(saw on website). For that matter

    they also carry the RS-52. I don't know your budget but just a suggestion.

    Bill

    Will an Onkyo TX-SR805 be enought to power an RC-64 and will that be a good center channel mate to my RF-82's?

    in Home Theater

    Posted

    The RC-64 is a very efficient(99dB) speaker. The Onkyo TX-SR805 has very high quality amps and power source usually only found on receivers

    at a much higher price point. On this and other forums many members with similar setups have chimed in and touted the capabilities of the 805.

    Get the RC-64, take it home, hook it up and listen. If not satisfied, buy an external amp to power the 64 or take it back and get the 62. Keep in mind,

    you might get the "bug" and may want to upgrade to the RF-63's or 83's, then you would already have the RC-64.

    Bill

    B&K 3 channel amp with Klipsch RF-63's

    in Technical/Restorations

    Posted

    I borrowed a B&K reference 4430 amp from a friend to demo. After plugging in all conections, turning on receiver then amp and sampling a cd, I expected it to knock my socks off. Instead there was distortion(low) and a sense of low output. Any possible reasons this could be happening? Owner's manual suggests a blown rail fuse. Anyone experienced this with B&K or any amp for that matter?

    Thanks, Bill

×
×
  • Create New...