ChipByrd

I am trying to decide if I want to keep my Chorus with BEC crossovers and ti tweeters OR RF-83s. The 83s obviously have more bass, so I added an SW-310 to my Chorus to fill out the bottom end. Here's my problem: I generally like the sound of the Chorus better, but the SW-310 doesn't really provide enough bass for my taste. I don't want boominess, but with some rock you want to feel it. I have tried placing the SW-310 all around the listening area, but even with the gain almost maxed, it doesn't impress. I am using a Cambridege 840a. Is their some trick or hookup procedure that I am missing? I may end up going with the 83s if I can't figure a way to get better performance from the SW-310. Help! I really want to keep the Chorus, but I want more bass. Thanks.

I have Chorus speakers with BEC crossovers and ti tweeters. I want to use my SW-310 to fill out the lower end. Where would you guys set the crossover on the sub? If it is helpful, I am using a CA 840 int. amp. Thanks. Chip

I should also mention, I am using a SW-310 with the Chorus, which really fills out the bottom end.

Thanks for the welcome, but I have been lurking around for a couple months. This site has been awesome. I really would like to hear from this who have had to make a decision between something like my Chorus and the RF-83s. Thanks.

About four months ago, I remembered that I had a pair Klipsch Chorus in the basement. For whatever reason, I felt the bug to get them up and running. I traded my 5.1 for a Cambridge Audio 840a v2. I also ordered new crossovers from and tweeters from Bob Crites. The transformation was nothing less than amazing. But on Tuesday, I found a great deal on a pair of RF – 83’s. The last couple days I have going back and forth. Which one do I like best? Which one has the best sound? I can only keep one large pair so I have to decide. In the end, I will choose the one best suited to my ears and musical tastes. But I am interested, which would you guys choose and why? Thanks for the info.

How high is your ceiling? Chris My ceiling is almost 7'.

I realize that the tube vs SS is a real debate starter. I am trying to figure out how I can best use my paltry resources to get the best sound possible. So here's another question. How many of you two-channel guys have bass traps and other room enhancements? It seems like this provides good bang for the buck and would be helpful in my 11.5' x 18' basement. But most of the info I've read had to do with home studios or home theatre set-ups. Is it as important for two-channel as HT?

That's funny. Even made my wife laugh!

Thanks Droid, One of my concern is budget. I realize the amount I listed isn't very much and I still need to spend some money on my listening are. My wife has been very tolerant thus far, but a big expenditre on a new tube amp might put her over the edge. When I taled to Mr. Crites he said he favors SS. I am sure I wll hear other opinions, which is what I want. BTW, what is WAF? It sounds like a designation for wife???

I am in the process of developing a listening room. It is 11.5' x 18'. Apart from my audio gear, I plan on one extremely comfortable chair. I am currently figuring out what kind of acoustic gear is necessary. Musically, I am a mixed bag: from Clapton to Chopin. I definitely lean toward high volume. Hope this helps. Thanks for any advice.

Hi, I recently upgraded my Chorus speaks with the Crites tweeters and crossovers. They sound sweet. I am running them through a Pioneer SX-1050. I also have a pair of RF-82ii that I am running through a Cambridge Audio 840a. I would like to try a tube amp. I have heard some on this site say they partner great with Klipsch and others say it doesn't make much of a difference. My budget is rather low so I will have to go used. I don't know where to begin. Can I find a good used tube amp in the $600 - 800 range? If so, what kinds would you suggest? Thanks for the help. Chip

Looks great. I look forward to hearing a full report on the sound.

Wow! This gives me some ideas. I am going to play around with this and will probably come back with more questions. This site has been amazingly friendly and helpful. Thanks again.

Hello, A couple weeks ago I asked for some help in setting up a listening room. I was told to provide a sketch of the area. Well, here it is. This is my basement. As you can see, it is basically divided into two sections. My wife has told me I can use either one, but preferably section 1. Door 1 is an open passageway to a hall. Door 2 is a standard interior door that leads into our laundry room. The windows are basic 36x39” and go to a standard ceiling. The walls and ceiling are all finished drywall and the floor is tight, Berber carpet. I plan to put one listening chair in there and any other items that might be helpful I will be using this exclusively for music. Currently, I have Chorus 1’s with upgraded tweeters and new crossovers from Bob Crites. I run them through a Cambridge Audio 840a int. I also have a vintage Pioneer sx-980 and a pair of Klipsch RB 81 ii’s and RF 62 ii’s. I also use a PS12 Sub for deep bass. I have an rDac through which I play digital music. This is my first foray into high (er) end audio, and I am sure I will be updating and adding things. Everything I read tells me that speaker placement and room acoustics are super important. The problem is that I don’t even know where to begin. I read about bass traps and audio panels and I am clueless. Any help or suggestions or directions you can give me will be greatly appreciated. I don’t want to spend a lot of money (under $600), but I would like to do the things that will give me the greatest enjoyment from my equipment. Again, I really appreciate whatever help may come. Chip

Hi, I am back with more newbie questions. I received my ti tweeter diaphragms and crossovers for my Chorus speakers. They are installed and my fingers are crossed. Initially, I had planned to get a Cambridge Audio 650a. As the weekend approached, I decided to upgrade to the 840a V2. It should be delivered tomorrow. So my Chorus are just setting there--BUMMER. Here are my questions: 1) If I decided to hook up my subwoofer, how does that connect to the 840a? Can I use basic RCA cables from preamp out to the "L" and "R" on my sub? 2) I keep hearing about break in times. What would they be for the new 840a? Do the new tweeters and crossovers need break in time? 3) Is there a section in this forum to get advice about speaker placement and other things to I've the room better acoustics? This sight has been awesome--friendly and informative.

Thanks USNRET, that sounds like good advice. Unfortunately, my receiver is a low end 7.1 Onkyo that is about 4 years old. So I am not sure that receiver would do the speakers justice. As I said, this is the first time I have had audio products beyond the cheap ones you get at the big box stores. But I can see why so many people get juiced about it.

I just received my ti tweeter diaphragms and crossovers for my Chorus speakers. Thanks Bob C. I won't be able to install them till Monday, which just happens to be when my Cambridge Audio 650a should arrive. I am psyched! This is my first foray into high (er) audio. This sight has been immensely helpful--thanks.

Let me say upfront, over the past couple weeks I have received some really helpful advice from this forum. This has been great because I am just getting into this. Anyway... here's where I am: I have a pair of Chorus speakers. I have ordered new crossovers and the titanium tweeter kit from Bob Crites. I have settled on the Cambridge Audio 650A for power. And I have an Arcam rDac-kw to play my digital music. Now... Here's the new question: When I look at the back of the Chorus, there are two posts. On the Cambridge, there are two sets of two posts. Do I just use one set on the Cambridge? And what kind of wires should I use to connect the (older) Klipsch to the (new) Cambridge. Some wires seem ridiculously expensive. If it will make a noticeable improvement in sound, I would use consider spending up to $75 - 100. Thanks again for the friendly advice and your patience. I am sure that this is sooo basic for many on the list. My next series of questions will be about speaker placement... But the question of the day are sufficient :-). Chip (the Novice)

Thanks for the input. As i said, this is tough for a novice. There are so many two-channel receivers for under $1,000 (my price range). When this the Cambridge Audio popped up for $499 it caught my attention. If there are any others you might suggest, I would greatly appreciate it. Thanks

Howdy, A couple weeks ago I asked some questions about Chorus speakers. I have since ordered new crossovers and tweeter diaphragms from Bob Crites. I have an Arcam rDac-KW that I will be using because I want to play my music from my digital toys. What I want to acquire next is a new power source. I want something under $1,000 and under $800 would be even better. New or used? A friend suggested this: Cambridge Audio - 650A Integrated Amplifier - it is $499. I was told it is second generation and that is why the price is relatively low. It is located here: http://www.audioadvisor.com/prodinfo.asp?number=CA650A. Is the Cambridge a good alternative for me? Is there something far better in the above mentioned price range? There are so many options it is hard for a novice. Thanks for any help, Chip (the novice)

Howsy, I asked this a couple weeks ago, but in the middle of the holidays there was almost no response. I have a pair of Chorus II's and am wondering if/how I shoul perform any maintenance on them. They sound good, but I would like to do everything possible to keep them that way for a long time. Thanks for the help.

I have a set of Chorus II's. I have owned them for a few years. They sound good, but is there a diagnostic that you can run to ensure they are still functioning well? Also, what kind of regular maintenance should I perform? One more question: I have a 7.1 receiver, is there any advantage in bi-wiring them (we don't watch tv and don't use the surround sound)?

By the way, are there better ways to go than the Arcam drac kw that's in a similar price range? Thanks

Thanks, that's helpful. I do want to stream my digital music (stored on a PC, managed on an iPad), to a receiver. So my choice is to get a new receiver, or a component that will allow me access to the one I own.

Hi, I have to tell you I come to this page as a complete novice. I have a pair of Chorus II's and a pair of BMW 601's. I also have a good sub-woofer. About four years ago I bought and an Onkyo home theater receiver. I also own a Pioneer SX 1250 (which I imagine still works well). My wife and I never watch TV and we got rid of it. I want to move my speakers upstairs and use them just for music. I have thought about bringing up the Onkyo and connecting an Arcam rDac KW. This will cost about $650. We like the Arcam because it will allow us to wirelessly access our digital music. But here's my question: For about the same cost as the Arcam, could I get significantly improved sound by buying a new receiver? Also, I have heard that two channel produces better audio quality than the home theater receivers. Which would be better for the speakers I own? If you read all this, thanks. You are a trooper. If you have any suggestions, they will be greatly appreciated.