Tony T
-
Posts
356 -
Joined
-
Last visited
Content Type
Forums
Events
Gallery
Posts posted by Tony T
-
-
If Paul actually did sign this, I wonder what the numbers meant? Must have been for a reason. Inventory purposes perhaps?
-
Certainly. It also appears the numbers 770524 were written by the same hand just after the signature. Maybe?
-
Is there any significance to a "Paul W. Klipsch" signatures on serial tags of 1977 Khorns? The signatures are vertical on the left edge of tags nowhere near the Inspected & Tested signature lines . Clearly signed in ink. Just wondering ...
-
Whoa, quite a setup he had ... sounds very nice. So if I understand you correctly, he disassembled the horn section of the speaker, lifted it up and moved it higher above the bass bin?
-
I have an opportunity to purchase a single 77' Khorn in great shape. Not that it makes a huge difference but, it happens to have PWK's signature on the serial tag. Anyway, does anyone use a single Horn between two Khorns as a center channel? This is for theater and music listening only.
Thanks, Tony
-
2 hours ago, JohnA said:
Some wire makers will tin one copper conductor to make phasing the speakers easier. Others will mold a ridge into the insulation of one side, for the same reason. I think that is what you are asking.
Not quite. I'm wondering why the variations in 12 gauge strand wires themselves. Looking at speaker wires (staring at the end of a speaker wire) they're copper copper, copper silver, or silver silver in their given pairs. Still wondering why this is the case. There must be a logical reason behind this.
-
No, I'm not referring to the actual speakers as much as speaker wires to facilitate the speakers themselves. From the amps to the speakers.
-
Not sure what you're asking Peter.
My speakers (78' Khorns/89' Lascala's) are stock, yes. Regarding wire well, I haven't gotten that far yet. Anxious to hook them up properly but wanting to feel certain of which wire to purchase. There're many brands of 12 G wire out there! I already know it's going to be 12 gauge. Just don't feel educated enough to make a wise choice yet. I want the best long term speaker wire.
-
Well no, I don't think we've covered this yet. After reading my post again, I'm thinking I didn't make myself clear enough. My fault.
When looking closely at speaker wires, there are 3 distinct variations. The two wires (paired together) are both copper or, the two wires are copper and silver OR, the wires are both (once again paired together) silver in color. I've always been curious why there are 3 separate variations. There's bound to be a logical reason behind this. No matter where I look for an answer, I cannot find one. I was hoping someone with greater understanding could shed light on the subject.
Thank you
-
I personally have a 38 x 26 room accommodating 2 Khorns and 2 Lascala's. I'll most certainly going to be using greater lengths of speaker wire, especially for the rear Lascala's.
-
Furthermore, why is side by side strand speaker wire (12/2, 14/2 or whatever) either copper/copper, copper/silver or silver/silver? I've never understood this. It seems to me copper/copper, side by side, dual strand would be the logical choice. Copper is in fact, a great conductor.
Upon close observation, my 78' Khorns internal wires are seemingly a 14 gauge or perhaps 16 gauge. The smaller gauge makes sense due to the short distance. What's even more interesting to me is the pairing of wires coming off the AA Board going to the 3 different destinations are;
Woofer = silver/silver
K-55-V = silver/silver
K-77 = silver/silver
All speaker destinations (entering the individual speakers) are obviously coated with a slick silver metallic type material. Looks as if they may have been dipped into a silver solder?
The same can be said for my 89' LaScala's. The AL-3 boards have the same gauge wires and again, all internal crossover boards & internal speaker destinations are silver/silver wire.
This would leave a person to guess that silver/silver paired speaker wire is in fact, the logical choice. Still, I technically do not know what the correct answer would be.
Anyone???
Thanks again, Tony
-
Furthermore, why is side by side strand speaker wire (12/2, 14/2 or whatever) either copper/copper, copper/silver or silver/silver? I've never understood this. It seems to me copper/copper, side by side, dual strand would be the logical choice. Copper is in fact, a great conductor.
Upon close observation, my 78' Khorns internal wires are seemingly a 14 gauge or perhaps 16 gauge. The smaller gauge makes sense due to the short distance. What's even more interesting to me is the pairing of wires coming off the AA Board going to the 3 different destinations are;
Woofer = silver/silver
K-55-V = silver/silver
K-77 = silver/silver
All speaker destinations (entering the individual speakers) are obviously coated with a slick silver metallic type material. Looks as if they may have been dipped into a silver solder?
The same can be said for my 89' LaScala's. The AL-3 boards have the same gauge wires and again, all internal crossover boards & internal speaker destinations are silver/silver wire.
This would leave a person to guess that silver/silver paired speaker wire is in fact, the logical choice. Still, I technically do not know what the correct answer would be.
Anyone???
Thanks again, Tony
-
Does anyone know of a good inexpensive online source for good quality heavy gauge speaker wire? Needless to say, there's infinite online options. Hoping someone would be kind enough to save me some time.
Much appreciation! Tony
-
Within a 38' x 26' x 9' room, I have my 2 LaScala's (rears) and Khorns. I have 2 each R-115SW subs up in a loft area high above the room. The corner of choice within the room for the Khorns has large diameter logs within the corners which support the cabin structure therefore, unable to position the horns against the 90 degree walls. The false corners are so I am able to use them in front of the large logs. Kind of a bummer but once again, impossible to eliminate the logs as they're part of the bearing weight/construction design.
-
Does anyone have any simple yet effective ideas for False Corners? I've seen a few online plans but not very intrigued by them. I certainly don't want to build a 2x4 wall that becomes a 4 1/2" thick eye sore. Any cool ideas would be appreciated. Something simplistic is my goal.
Thanks, Tony
-
Yeah, I kinda figured out they're not so good in the specs department. When receiving ONE response, and not a favorable response at that, the story is pretty well told.
Thanks dcbrown
-
So for interesting fun, I Googled subwoofers in most every way to determine the "best subs" out there. I looked into several mentions including the best of 2017 & 2018 (LOTS of opinions out there) and much to my surprise, the R-115SW wasn't mentioned. The newer Klipsch 10" & 12" subs rated high and were often recognized as being leaders but no mention of the 15" bad boy. This was very surprising to me to say the least! I've already made my mind up to buy one (and likely two) of them to go with my Khorns & LaScala's ... keep it all in the family so to speak. But NO MENTION AT ALL OUT THERE? Seriously hard to believe. The only thing I can guess is general ratings aren't recognizing and/or rating higher end equipment population. Perhaps general ratings lean toward the subtle and common listening crowd?
Hmm
-
Is there a problem with my posting that I am not aware of? Have I broken a rule?
-
I agree all of our ears do not hear reproduction equally. I'm a music listener and welcome the very best reproduction possible! That's really all there is to it. Seems to me there should be an opinion regarding finer quality differences. But then again, not everyone out there has 1 pair of both makers' boards in their Khorns to be able to switch back n' forth to accurately and definitively determine for themselves. Hmm
-
Cool looking Theater!
-
I simply googled Ebay Klipschorns and there they are. There's approx. 4 other Khorns (NOT new) on their
-
If this isn't a scam, I don't know what is. As they say, if it's too good to be true well, it is!
-
Regarding best money spent, which is the best way to go? It's obvious Crites is less money. Is a person getting a better product while paying the higher price at ALK?
In short, which of the two is a person actually "getting what they paid for" in value?
-
Thank you, now reading makes good sense
PWK Khorn signatures
in Ask the Historian
Posted
Nope, I recently purchased them from an estate sale. I wasn't going to purchase them since I already own a pair but I barely picked up on the signature. I stole them (figuratively speaking of course) knowing the seller didn't even know what he had ... speaker wise not signature.