Joey B KP600 Posted January 10, 2009 Share Posted January 10, 2009 Hi folks; Just wanted to know what happened to Chuck Mulhern? Besides Roy, Jim Hunter, Bruce Marlin(1132),Georgia (Bell),Tom Gallagher Chuck was the man to talk about Pro Series. Thank you Joey B. Quote Link to comment Share on other sites More sharing options...
Moderators Amy Posted January 11, 2009 Moderators Share Posted January 11, 2009 Hi Joey, Chuck is no longer with Klipsch. I'm not sure how you'd be able to contact him. If you have questions on our Pro Series, feel free to call our support at 800-554-7724. If they don't have the answer you need, they will find out! Thanks Quote Link to comment Share on other sites More sharing options...
Joey B KP600 Posted January 14, 2009 Author Share Posted January 14, 2009 Hi Amy; Talked to chuck just acouple of days before he left. Had some questions about some kp 362s. I had purchased three for an installation in late 2007 and he said they were going to be produced again? wanted to know if they were and also the status of bringing back the kp 366s. The whole pro division has gone away and wanted to know if it will return? I use a 24 box KP 600 A system for my sound co ( the best sounding large format system EVER ) --all the speakers I use are Klipsch, just hope Pro Returns. Thanks Joey B Northeast Sound Quote Link to comment Share on other sites More sharing options...
DrWho Posted January 15, 2009 Share Posted January 15, 2009 24 box KP600? Man that's gotta be wicked [Y] You seriously need to post some pics. I wish Klipsch Pro would return too.... Quote Link to comment Share on other sites More sharing options...
Joey B KP600 Posted January 15, 2009 Author Share Posted January 15, 2009 Dear Mike; I will post some pictures in the near future. I also use 16 KSM 15 II, 4 KP 450 A, 4 vintage Industrial LaScalas w/trim package, you should hear them with the KP 480 sub. They take a 1963 design and put it over the top. I have 60 Klipsch in my inventory. Call me sometime aft. 6:00 pm EST and we will talk. I have been using Klipsch since my high school electronics teacher showed me his home LaScalas.( My jaw hit the ground!!!! ) 978-343-9343 My home phone. Thanks Joey Quote Link to comment Share on other sites More sharing options...
DrWho Posted January 15, 2009 Share Posted January 15, 2009 Hey Joey, can I catch you on the weekend? (when the cell minutes are free) So do you own the trailer for hauling all that stuff around too, or rent whenever it's time for a gig? And what are you running for amps and processing? That would be a lot of amplifiers if you were biamping everything. Quote Link to comment Share on other sites More sharing options...
Joey B KP600 Posted January 15, 2009 Author Share Posted January 15, 2009 Hi Mike; I rent a truck. Crest 8001s on subs and lows and Crest 4801s on mids and highs. All others mostly on Carver 2.0s. I have 7 of them in my monitor rack. I use the stock KP 600 EC crossovers because they have optimal curves at x over points and will not overload till after an output of 7v. I tried some BSS mini drives but were to difficult to make adjustments real fast. The Klipsch crossovers were made by USA audio (Whirlwind), they looked at Wheatstone to make them but were to costly. I wish they did build them because they have their drawbacks from USA Audio. Calling this weekend would be fine. Phone calls would save on our fingers and transfer more info. TRhanks Joey B Northeast Sound Quote Link to comment Share on other sites More sharing options...
Arky Posted January 21, 2009 Share Posted January 21, 2009 I would love to hear all that in action but i'm guessing Northeast Sound is in the NE & that ain't nowhere near Arkansas.[] Quote Link to comment Share on other sites More sharing options...
DrWho Posted January 21, 2009 Share Posted January 21, 2009 I would love to hear all that in action but i'm guessing Northeast Sound is in the NE & that ain't nowhere near Arkansas. I bet he would travel to AK if you hired him out for a gig [] btw, sorry I didn't call...got pulled away by a friend wanting "sound" advice for his church. That project has exploded the last couple weeks. Quote Link to comment Share on other sites More sharing options...
Joey B KP600 Posted January 22, 2009 Author Share Posted January 22, 2009 Hi Mike; Hope your church install goes well, I did an install in Dec 08 in my local senior center which is an old armory with a huge dance hall. I used 3 Klipsch KI 362s in a center cluster flown up side down and I have close to 180 deg. h - coverage. We used EV amps Ashly ProTea digital eqs. We also used smaller Klipsch speakers for delays. The system kicks A**. If you ever get a chance call my home phone @ 978-343-9343 and we will talk. Yes a 24 box KP600 system is pretty crazy. I have had the chance to purchase a new line array but just could not bring myself to do it as I would need 40 boxes to do what the 600s are already doing!! Thanks Joey B Quote Link to comment Share on other sites More sharing options...
colterphoto1 Posted January 25, 2009 Share Posted January 25, 2009 Would you happen to have a spare xover network or cable ends for the KP600? I've got boxes and nearly all working drivers now but need to fashion a way to connect it all. Have you found a suitable diaphragm for the K60 driver? Michael Quote Link to comment Share on other sites More sharing options...
Joey B KP600 Posted January 26, 2009 Author Share Posted January 26, 2009 How are you? Yes I purchased spare X-overs on E-Bay 5 years ago. The cable ends should be standard Cannon EP Series, if you need cable I can get them built with the EP series connectors on them in any legnth at dealer cost. The K- 60 driver is an EV DH 1506. The diaph. is still available. You need to take the ring off the assembly as the K-60 does not need it as in the EV driver. If you need any I have them and also if you need I can rebuild them for you. Call me in the evening sometime 978-343-9343 I may have alot of info you can use as I am well versed in all the pro stuff. And yes a 24 box KP 600 system is scary!!! You would need 36 to 40 boxes in EAW 850s series which was the best selling trap box concert system at the time to stand up to the KP 600s. Thanks Joey B Quote Link to comment Share on other sites More sharing options...
colterphoto1 Posted January 26, 2009 Share Posted January 26, 2009 I will call you. Is there a replacment for the K41 compression driver or can you recone them? Quote Link to comment Share on other sites More sharing options...
colterphoto1 Posted February 5, 2009 Share Posted February 5, 2009 Joey, I tried to call twice yesterday.You around? Michael Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.