Jump to content

Re: RVX-54 Not Enough Punch for Mains...


Maestro1

Recommended Posts

I have recently acquired a pair of RVX-54's for my main front speakers to replace a bigger pair of Altecs I sold (regrettably) due to moving to a smaller place.

My Klipsch RVX-54 speakers are detailed and fine for movies (will probably make great surround speakers), but for music they lack the punch and dynamics of my old Altec Model 14's (no surprise.) My question is would the Klipsch RF-62's be a big enough step up from my 54's or would it be necessary to step up to some Klipsch RF-35's/RF-82's to get back the punch and dynamics my old Altec Model 14's had? I'm driving my speakers with a Pioneer Elite VSX-56txi receiver. Thank you.

Link to comment
Share on other sites

Funny I have had the same thoughts today Jason. I was thinking of either a good used Heresy 1 or 2 as I can't really go for a new 3 right now. A Quartet or Forte offers a bigger cabinet design and maybe a bigger soundstage and more bass than the Heresy. It seems there is no way I can get away from a bigger cabinet to achieve the bigger sound. The Heresy or Quartet would seem to be a fairly close match to my KLF-C-7 center channel as well. I'm thing about either the Heresy or Quartet now..

Link to comment
Share on other sites

HEY MAESTRO1 LOOK THESE PUPPY'S ON THE INTERNET UNDER KIPSCH THEN GIVE THEM A CALL SEE IF YOU CAN ORDER THEM

CF-4 Floorstanding Speaker

CHRIS

HERE'S THE SPECS ON THEM

FREQUENCY RESPONSE 34Hz-20kHz(+-)3dB
POWER HANDLING 300 watts maximum continuous (1200 watts peak)
SENSITIVITY 102dB @ 1watt/1meter
NOMINAL IMPEDANCE 8 ohms
TWEETER K-63-KN 2" (5.08cm) Aluminum diaphragm compression driver
HIGH FREQUENCY HORN 90(o) x 60(o) Tractrix® Horn
WOOFER Two K-30-KN 12" (30.48cm) Poly carbon graphite cones
ENCLOSURE MATERIAL Medium density fiberboard construction (MDF)
ENCLOSURE TYPE Bass reflex via dual front-mounted ports
DIMENSIONS 44" (111.76cm) x 17" (43.18cm) x 19" (48.26cm)
WEIGHT 108 lbs. (48.99kg)
FINISHES Whitewash, Lt. Oak, Med. Oak, Cherry, Walnut, Black Satin
BUILT FROM 1994
BUILT UNTIL 1996
FREQUENCY RESPONSE 34Hz-20kHz(+-)3dB
POWER HANDLING 300 watts maximum continuous (1200 watts peak)
SENSITIVITY 102dB @ 1watt/1meter
NOMINAL IMPEDANCE 8 ohms
TWEETER K-63-KN 2" (5.08cm) Aluminum diaphragm compression driver
HIGH FREQUENCY HORN 90(o) x 60(o) Tractrix® Horn
WOOFER Two K-30-KN 12" (30.48cm) Poly carbon graphite cones
ENCLOSURE MATERIAL Medium density fiberboard construction (MDF)
ENCLOSURE TYPE Bass reflex via dual front-mounted ports
DIMENSIONS 44" (111.76cm) x 17" (43.18cm) x 19" (48.26cm)
WEIGHT 108 lbs. (48.99kg)
FINISHES Whitewash, Lt. Oak, Med. Oak, Cherry, Walnut, Black Satin
BUILT FROM 1994
BUILT UNTIL 1996
FREQUENCY RESPONSE 34Hz-20kHz(+-)3dB
POWER HANDLING 300 watts maximum continuous (1200 watts peak)
SENSITIVITY 102dB @ 1watt/1meter
NOMINAL IMPEDANCE 8 ohms
TWEETER K-63-KN 2" (5.08cm) Aluminum diaphragm compression driver
HIGH FREQUENCY HORN 90(o) x 60(o) Tractrix® Horn
WOOFER Two K-30-KN 12" (30.48cm) Poly carbon graphite cones
ENCLOSURE MATERIAL Medium density fiberboard construction (MDF)
ENCLOSURE TYPE Bass reflex via dual front-mounted ports
DIMENSIONS 44" (111.76cm) x 17" (43.18cm) x 19" (48.26cm)
WEIGHT 108 lbs. (48.99kg)
FINISHES Whitewash, Lt. Oak, Med. Oak, Cherry, Walnut, Black Satin
BUILT FROM 1994
BUILT UNTIL 1996
FREQUENCY RESPONSE 34Hz-20kHz(+-)3dB
POWER HANDLING 300 watts maximum continuous (1200 watts peak)
SENSITIVITY 102dB @ 1watt/1meter
NOMINAL IMPEDANCE 8 ohms
TWEETER K-63-KN 2" (5.08cm) Aluminum diaphragm compression driver
HIGH FREQUENCY HORN 90(o) x 60(o) Tractrix® Horn
WOOFER Two K-30-KN 12" (30.48cm) Poly carbon graphite cones
ENCLOSURE MATERIAL Medium density fiberboard construction (MDF)
ENCLOSURE TYPE Bass reflex via dual front-mounted ports
DIMENSIONS 44" (111.76cm) x 17" (43.18cm) x 19" (48.26cm)
WEIGHT 108 lbs. (48.99kg)
FINISHES Whitewash, Lt. Oak, Med. Oak, Cherry, Walnut, Black Satin
BUILT FROM 1994
BUILT UNTIL 1996
CF-4
500x500.aspx

CF-4 Floorstanding Speaker


Customer ReviewsCustomer Reviews

Find An Authorized DealerFind An Authorized Dealer


Our Dealers

LoadingLoading

Specifications

FREQUENCY RESPONSE 34Hz-20kHz(+-)3dB
POWER HANDLING 300 watts maximum continuous (1200 watts peak)
SENSITIVITY 102dB @ 1watt/1meter
NOMINAL IMPEDANCE 8 ohms
TWEETER K-63-KN 2" (5.08cm) Aluminum diaphragm compression driver
HIGH FREQUENCY HORN 90(o) x 60(o) Tractrix® Horn
WOOFER Two K-30-KN 12" (30.48cm) Poly carbon graphite cones
ENCLOSURE MATERIAL Medium density fiberboard construction (MDF)
ENCLOSURE TYPE Bass reflex via dual front-mounted ports
DIMENSIONS 44" (111.76cm) x 17" (43.18cm) x 19" (48.26cm)
WEIGHT 108 lbs. (48.99kg)
FINISHES Whitewash, Lt. Oak, Med. Oak, Cherry, Walnut, Black Satin
BUILT FROM 1994
BUILT UNTIL
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...