SonicSeeker Posted August 25, 2011 Share Posted August 25, 2011 Any one with first hand eperience with this unit. Quote Link to comment Share on other sites More sharing options...
Quiet_Hollow Posted August 25, 2011 Share Posted August 25, 2011 Any one with first hand eperience with this unit. Yes, I've got one. What would you like to know? Quote Link to comment Share on other sites More sharing options...
SonicSeeker Posted August 26, 2011 Author Share Posted August 26, 2011 I just received one last night and will try to set it up today. The owners manual looked a little confusing I thought it was supposed to be a plug it in and let it run kind of device. How satisfied are you with it? Quote Link to comment Share on other sites More sharing options...
Quiet_Hollow Posted August 26, 2011 Share Posted August 26, 2011 How satisfied are you with it?VERY satisfied. Once levels are set, the chirps and analysis (the hard part) are fully automatic. Set the sub delay based on the results, pick you're crossover point on the receiver and pure ****'ing magic. The AS-EQ1 will suggest a crossover point for you (40Hz in my case), but you don't have to use it (I use 80 Hz, low as my receiver goes). Seeing that the passband phase response is linearized after the correction, you are free to choose a crossover point based solely on your main speaker's frequency response. You will not be disappointed. See: http://www.billfitzmaurice.info/forum/viewtopic.php?f=6&t=12940&hilit=christmas+in+september Quote Link to comment Share on other sites More sharing options...
SonicSeeker Posted August 26, 2011 Author Share Posted August 26, 2011 The owners manual has me a little nervous about the set up, level matching with your receiver (trim level, SAT trim differential, ect.). I thought I could plug it in and it did the rest but it doesnt seem to be that way according to the manual. The add says you wont even need to open the manual, and the product says make sure to read the manual completely first. Quote Link to comment Share on other sites More sharing options...
Quiet_Hollow Posted August 26, 2011 Share Posted August 26, 2011 I can help you get things straightened out if you like. PM sent. Quote Link to comment Share on other sites More sharing options...
Beechnut Posted August 26, 2011 Share Posted August 26, 2011 So this is a standalone item. Does this do the same thing that Audyssey has in the MultiEQ XT32? (Their newest room correction) Quote Link to comment Share on other sites More sharing options...
Quiet_Hollow Posted August 26, 2011 Share Posted August 26, 2011 So this is a standalone item. Does this do the same thing that Audyssey has in the MultiEQ XT32? (Their newest room correction) Yes, according to the literature that came with my unit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.