SteveBachman Posted October 1, 2011 Share Posted October 1, 2011 Can anybody please help me. I hooked up 2 RF82II speakers to a Denon 3312ci receiver. All I am getting is fuzz on the speakers. This is a new set-up and the first time I have ever hooked up a speaker system. What am I doing wrong? Steve 949-631-3028 Quote Link to comment Share on other sites More sharing options...
GoFastr Posted October 2, 2011 Share Posted October 2, 2011 What source are you trying? If it's the tuner do you have the FM antennae hooked up too? Did you use Audyssey to setup your speakers? Maybe give this a try? http://batpigworld.com/ Quote Link to comment Share on other sites More sharing options...
MikeFord Posted October 2, 2011 Share Posted October 2, 2011 Turn it off, read the manual, follow the steps. Quote Link to comment Share on other sites More sharing options...
SteveBachman Posted October 2, 2011 Author Share Posted October 2, 2011 Thanks. I have not used Audyssey as I only have the two floor speakers hooked up right now. Waiting on a center speaker that is due in on Wednesday and then I will also put up the surround speakers. At that time I will try Audyssey. I did get the floor speakers to work after attaching the cable from my rabbit ears to the HD radio tuner antenna port on the back of the Denon receiver. But now I do not get a television picture. I do not have cable and I relied on the rabbit ears which were hooked up to the televisions "antenna cable in" port to get a picture. Apparently I am not getting a picture feed now as I get the "channel not available- no signal" on the television. I have a HDIM 1cable going from the receiver to the television. What do I need to do to get a picture? Quote Link to comment Share on other sites More sharing options...
Fish Posted October 2, 2011 Share Posted October 2, 2011 If you read the manual you will have a better understanding of all features and operations.This is meant as constructive advise, if you are not familiar enough to set up an avr you have some homework to do.Good Luck, it will pay off in sound. Quote Link to comment Share on other sites More sharing options...
SteveBachman Posted October 2, 2011 Author Share Posted October 2, 2011 Do I need to get a splitter so that I can send a signal to the receivers HD radio tuner antenna port and to the televisions "antenna cable in" port at the same time? The manual does not cover using "rabbit ears" for television input signal? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.