Tuax Posted February 13, 2012 Share Posted February 13, 2012 Recently received my Yamaha RX-A1010 and the sub out is nowhere near what my previous receiver did. I have turned everything up in the receiver and on the sub and still get nowhere near the sound I had. With the previous receiver I set the sub to -15db I have put it up to +12, changed the YPAO results manually from -10db to 0db. (side note) YPAO set my sun to 160hz?? Reason I am thinking an issue with the sub out. Is it possibly a bad output from the receiver? I tired both sub-outs and a new Monoprice cable. The only other thing could be the sub, but seems unlikely since I only replaced the receiver. Any thoughts would be great. Going to bite the bullet and hook up the old HK receiver again and see if makes a difference. Thanks in advance! Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted February 13, 2012 Share Posted February 13, 2012 Are your speakers set to large on your receiver? If so, set them to small and see what happens. Quote Link to comment Share on other sites More sharing options...
Tuax Posted February 13, 2012 Author Share Posted February 13, 2012 It did set my RF's to Large and I changed the Sub X-crossover to 100hz. I'll try that when I get home. Thanks, Quote Link to comment Share on other sites More sharing options...
Utard Posted February 13, 2012 Share Posted February 13, 2012 Are you just using 2.1 sound? Do you get anything out of the sub? My newer Pioneer will not do 2.1 sound. I have only been able to get sub to work with 5.1 6.1 7.1 sound out of mine with movies/tv. Music will not get the sub to turn on. Quote Link to comment Share on other sites More sharing options...
Tuax Posted February 13, 2012 Author Share Posted February 13, 2012 Havent tried 2.1 sound yet but I will when I get home. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.