tanthuyhoangde Posted January 22, 2017 Share Posted January 22, 2017 My receiver is Onkyo TX-NR646. Is it because it only outputs 100W for center channel while RC62ii is 150W?Thank you for any advice.Sent from my SM-N910T using Tapatalk Quote Link to comment Share on other sites More sharing options...
Moderators Youthman Posted January 22, 2017 Moderators Share Posted January 22, 2017 The power isn't the issue unless you are cranking the receiver up so loud that the amp begins to clip and cause the distortion. Try swapping your center and one of your mains. If you hear the distortion still in the RC62ii, the issue is with the center. If the distortion switches to your main, your receiver is the issue 1 Quote Link to comment Share on other sites More sharing options...
derrickdj1 Posted January 22, 2017 Share Posted January 22, 2017 Try the center speaker on another channel. If the noise persist, it is the speaker most likely. If it is clear on the other channel, then the avr chenter channel has a problem. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.