001 Posted January 25, 2017 Share Posted January 25, 2017 Curious if anyone has or can measure the ohms of the chorus 2 mid driver &/or the tweeter? i recently purchased a pair of WO ch2's & they didnt sound as good as my forte2's in the upper mid & tweet areas, they just didnt have that crisp klipsch sound these speakers are known for. so i replaced the caps in the x-overs & noticed an instant improvement & they sound much much better now. but im curious if the prev owner may have driven them too hard or abused them to the point the mid/tweet drivers are damaged. the only way i can think of verifying that is to see what other known good drivers measure. if thats not a good way to determine damage please edumacate me on a better way or if its even possible to determine that with an ohm meter. i just pull the rear passive & unhook the wires to the mid or tweet to eliminate the x-over from the readings. these are the earlier version ch2's with the stapled on paper tags, later ones ive seen have the stick on vinyl labels, not sure if that matters. any help would be appreciated to confirm my mid & tweet drivers are within spec. Quote Link to comment Share on other sites More sharing options...
jimjimbo Posted January 25, 2017 Share Posted January 25, 2017 8.7 on the tweeter, 11.4 on the mid Quote Link to comment Share on other sites More sharing options...
001 Posted January 25, 2017 Author Share Posted January 25, 2017 thank you sir. i will check mine out again to compare. last time i checked them was when i had the x-overs out & dont remember the exact number. Quote Link to comment Share on other sites More sharing options...
jimjimbo Posted January 25, 2017 Share Posted January 25, 2017 Yes, check them OFF the crossover Quote Link to comment Share on other sites More sharing options...
001 Posted January 28, 2017 Author Share Posted January 28, 2017 both mids & tweets checked out good. thanks again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.