Gints Posted September 27, 2019 Share Posted September 27, 2019 Hey - likely a silly question incoming here. I have a set of Cornscala. I am in the process of making some improvements (bi-amping, new ALK ES5800T high crossover, and replace CT125 with CT120 tweeter). The problem is, whoever made these was a bit of a woodworking genius, and I cannot for the life of me get the tweeter and throat out. Panel is perfectly recessed to match the throat, same throat on CT120. However on both the CT125 in the speaker, and the CT120 I want to put in, the throat seems firmly affixed to the circular driver (threaded with glue). Even the with magnet removed, I cannot get it through the recessed area which is quite thick, frontwards or backwards. Am I an idiot? How do these things get in there? Quote Link to comment Share on other sites More sharing options...
Khornukopia Posted September 27, 2019 Share Posted September 27, 2019 The tweeter driver will unscrew from the horn. There should not be any glue on the threads. It is normally tight. You will need to gain access to the back of the tweeter and while the tweeter horn is attached to the cabinet, grip the driver and turn it counter-clockwise. Quote Link to comment Share on other sites More sharing options...
Gints Posted September 27, 2019 Author Share Posted September 27, 2019 Okay. That worked. CT125 is now out. The 'Glue' I referred to is on the CT120 to go in, as displayed. These are brand new so I don't want to over-force things - looks like some kind of threadlock? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.