k2dx Posted November 23, 2002 Share Posted November 23, 2002 Here is a repost of two methods to retrieve ambience from stereo recordings: http://nanaimo.ark.com/~pat/surround.jpg (I came across this the other nite). DIY the free way..... The original Dynaco method of ambience retrieval (from the David Hafler days) is as follows: Connect the two rear speakers in series, + to -. Connect the remaining rear terminals, a + and a - from each, to the two front + connections. I used this method for years, it works well BUT....not all recordings have ambience information to retrieve. Some may have none. The effect isn't overwhelming, like discreet quad channels or Dolby or DTS etc. Seems that Pink Floyd (DSOTM) was a good recording to try. You probably won't need a rear level control, but if you do use a SERIES connected fader, only two terminals. One end and the center. Leave the other end unconnected. Quote Link to comment Share on other sites More sharing options...
Deang Posted November 23, 2002 Share Posted November 23, 2002 Interesting. So the Dynaco product probably just follows this wiring scheme 'in the box'. Of course, for $35 -- you get the nifty box and the cool knobs:) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.