Pondoro Posted December 14, 2020 Share Posted December 14, 2020 First off, is grill boards what they call the panels that support the grill cloth? I bought some Heresy speakers with no grills. I bought fabric from Crites and metal logos. I now have the Masonite hardboard material. I know that it must be smaller than the rectangular hole that it sits in. How much smaller? At least by twice the thickness of the cloth that will wrap around the board. How much more than that? And the holes for the speakers - Is the correct size exactly the same as the outlet of the speaker or a bit larger? How much larger? Thanks Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted December 14, 2020 Share Posted December 14, 2020 There's probably 2mm of space around my Heresy grilles when they're installed. I haven't measured the driver cutouts in the grilles but they should be at least the diameter of the cutouts in the motorboard. Quote Link to comment Share on other sites More sharing options...
Pondoro Posted December 14, 2020 Author Share Posted December 14, 2020 32 minutes ago, wuzzzer said: There's probably 2mm of space around my Heresy grilles when they're installed. I haven't measured the driver cutouts in the grilles but they should be at least the diameter of the cutouts in the motorboard. 2mm on each side? Thus the cutting dimension for the board would be width (or height) of the rectangular opening minus 4 mm minus 2x the thickness of the cloth. Cloth thickness is probably negligible. Thanks! Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted December 14, 2020 Share Posted December 14, 2020 Each side, yes. It's about wide enough to stick a quarter in to help pry it off as needed. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.