zeagan Posted October 25, 2021 Share Posted October 25, 2021 Selling together, no interest at this time in splitting up. The horns are the ebay clones of K510's and included are some photos of them beside new k510's with mumps. They're slightly heavier and thicker than the real ones and are very (surprisingly) well made. The 2446h drivers have zero issues and I was using them up until recently in a two way setup with an LS bass bin clone, original titanium diaphragms. Hardware to attach the JBL to the K510 is a little tricky as two of the mounting holes can be tough to get to with the larger diameter bolts used in the JBL horns than the B&C ones Klipsch uses. I was running them with two out of four bolts holding them on with no issue (will include these bolts), getting shorter bolts and getting them in is possible, just never felt the need. Below are photos as well as a response measurement of the JBL 2446h vs the Klipsch K691 driver for comparative purposes. Will happily ship within Canada, could potentially be convinced to ship to the US for an enthusiastic buyer. Buyer pays shipping. Horns and drivers will be shipped in separate packages for the safety of the horns, drivers are approx 33lbs each. -$550 (Canadian, so...~$450 USD) Quote Link to comment Share on other sites More sharing options...
carlthess40 Posted October 25, 2021 Share Posted October 25, 2021 What would shipping be to Deltona Fl 32825 1 Quote Link to comment Share on other sites More sharing options...
zeagan Posted October 25, 2021 Author Share Posted October 25, 2021 15 minutes ago, carlthess40 said: What would shipping be to Deltona Fl 32825 $130USD for UPS Worldwide Expedited (cheaper for saver but expedited includes their basic brokerage service so less likely to get screwed at the border.) Quote Link to comment Share on other sites More sharing options...
carlthess40 Posted October 26, 2021 Share Posted October 26, 2021 I have to pass. Thanks anyway Quote Link to comment Share on other sites More sharing options...
zeagan Posted October 27, 2021 Author Share Posted October 27, 2021 17 hours ago, carlthess40 said: I have to pass. Thanks anyway No worries at all! Was good to get an idea what shipping to the US would cost. Quote Link to comment Share on other sites More sharing options...
zeagan Posted November 2, 2021 Author Share Posted November 2, 2021 Bump - Still available for anyone out there looking to enter into the world of two way horns, or three ways with a super tweeter. Quote Link to comment Share on other sites More sharing options...
DRJackson Posted January 15, 2022 Share Posted January 15, 2022 (edited) @zeagan hey, checking to see if these are still around... I'm in Alberta, working on a small-town cinema overhaul, thinking about making a three-way center channel and your feedback on the Klipsch pro designs and on DSP options would be appreciated. Send me a PM if you can. Edited January 15, 2022 by DRJackson Typo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.