Jump to content

Home theatre placement advice with RP 8000F please (complete with 3D drawings!)


BestPosition

Recommended Posts

Hi everyone,

 

Just quickly, I currently have an old Quintet 5.0 system from 2012. Yes, the sub amp ceased to power on a few years ago. I listened to a friends 5.1.2 setup recently with a 65" CX and it reignited my desire to do a decent home theatre for myself. 

 

An issue I have is that I'm in Australia, so 1) All the HT gear is very expensive compared to what you get it for and 2) We cannot try first, either in a shop or at home (not where I live anyway). There is no concept of sending it back here so we have to make the right decision first go.

 

I'm fairly settled on my front stage either being RP 8000F or RP 600M and a 504C. An alternative is SVS Ultra bookshelves and centre. Either way I am probably going with an SVS sub probably the PB3000, but maybe PB2000. TV will be a 77" C1 probably wall hung due to the centre channel being hard to place adequately.

 

I have a 13' x 17' room but with several bonus areas hanging off it. Currently there is a very clear echo when I click my fingers. Have plain walls and tiled floors with one rug. I will explore acoustic treatment as best I can but I'm reasonably limited. Planning on adding some heavy curtains for at least the windows, but maybe also the two room gaps as well as some acoustic panels around the tv and back wall.

 

My current concern is around the RP 8000f and placement of them and the sub up the front. Given their size and my layout I'm struggling to see just how it's going to work. So I jumped on a floor planner website and modelled the room to help illustrate everything. Bonus everything is to scale!

 

The left channel will pretty much have it's rear port facing out into a small corridor. Will this have much of a negative effect?

 

The right channel is into the corner and it doens't leve any room to optimally place the sub there so I've moved it inwards on the right side.

 

It's just feeling a bit cramped trying to fit everything and I can't help but think I'd be better off with the RP 600M bookshelves, ideally wall mounted allowing the sub to move into the corner properly, but then they'd be happer to be closer to the wall than the 8000F so could go on stands.

 

Thanks very much for any insights or advice you might have. Hope the diagrams help :)

Overhead.jpg

2DImperial.jpg

2DMetric.jpg

Behind.jpg

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...