kLiPsCh_JuNkIe371 Posted December 27, 2002 Share Posted December 27, 2002 When i hook it up i only get noise from the dd-51 test thing and cannot get sound coming from the computer. Is there a mode i need to switch to on the computer to make it work? If so what is the mode and what do i click to get to it? Thanx Quote Link to comment Share on other sites More sharing options...
Moderators Amy Posted December 30, 2002 Moderators Share Posted December 30, 2002 What kind of soundcard do you have? If it's an audigy, make sure digital output only is selected, and the sample rate is set to 48 or lower. Quote Link to comment Share on other sites More sharing options...
kLiPsCh_JuNkIe371 Posted December 31, 2002 Author Share Posted December 31, 2002 both have been selected with no sound Quote Link to comment Share on other sites More sharing options...
Donald1800 Posted January 1, 2003 Share Posted January 1, 2003 If I understand you correctly, you are using a sound card AND the DD5.1 decoder at the same time. This sounds strange as both are decoders. If your sound card has seperate outputs for R/L, SR/SL, C/SW, run cables from these outputs directly to the identical SW inputs. Or, run a single cable from the card digital or optical output to the identical DD5.1 input - make sure that you have selected the correct DD5.1 input via remote - and all cabling from the DD5.1 to the PM5.1 are correct. Either of these connection schemes should work. When in doubt, read the manual(s). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.