jstrossner Posted April 11, 2001 Share Posted April 11, 2001 I have recently changed speaker cable. The new cable has WBT-660 spade connectors which are too wide to fit into the binding block on my Belles. Does anyone know of a solution? Maybe some binding post that would screw into the block and elevate the connection? Any help would be appreciated! Jeff Quote Link to comment Share on other sites More sharing options...
JohnA Posted April 11, 2001 Share Posted April 11, 2001 The neatest solution I've heard is someone here used a small piece of copper plate and a machine screw and bolt to make an adapter. One end was sized to fit into the "binding block" and the other has the screw in it to accept the cable. John Quote Link to comment Share on other sites More sharing options...
Ray Garrison Posted April 12, 2001 Share Posted April 12, 2001 I took a short length of bare copper wire (about 2 inches), made a loop in one end, used a brass machine screw and nut to clamp the speaker cable's spade lug to that loop, then connected the other end of the wire to the terminal block on the Al K. crossovers on my La Scalas. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.