wayneair Posted March 17 Share Posted March 17 (edited) I’ve scoured the forums for clarification, can’t find pertinent info. If anything, I’m more confused. Previously restored a set of KG 5.2s, replaced the metal domes with new Ti domes, there was no ferrofluid. The 3.5 domes are phenolic/kapton(?) with ferrofluid. I plan on upgrading these with Ti domes. The question is do I leave the ferrofluid, clean out and use new ferrofluid, or clean out and leave it dry? If I leave it or clean and use new fluid, do I need to find an adhesive to seal it? There is currently no adhesive. If I had to choose what to do right now, it’d be a roll of the dice. TYIA Edited March 17 by wayneair Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted March 18 Share Posted March 18 When I replaced the tweeter diaphragms on a few pairs of speakers, I was instructed to use a post-it note and drag it inside the thin channel where the ferrofluid is, doing this for a couple full “swipes” inside it. That was it and I never had any issues. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.