tillmbil Posted June 19, 2003 Share Posted June 19, 2003 I fired up my new purchase the other day and one channel is not playing. I switched all the tubes from left to right one at a time, and still very little sound. If you turn the volume way up you hear some scratchy sound. I thought maybe it was the RCA's, but just replaced them with no improvement. Any ideas? Quote Link to comment Share on other sites More sharing options...
Marvel Posted June 19, 2003 Share Posted June 19, 2003 I assume you are feeding it from a preamp. Can you feed it with something else that has output gain controls (CD player, tape deck, etc.) to make sure it isn't the preamp? Swap speaker connections to make sure it isn't a speaker. After that, I would say open it up and start checking solder connections inside. The usual caveats apply: I'm not responsible for you electrocuting yourself from the high voltages inside the ST-70. Marvel Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.