Jon Anderson Posted January 24, 2004 Share Posted January 24, 2004 Here is a rough drawing of the 1RB crossver from my 1965 KBWO. Not much information available on forum on this type of crossover. Another member is getting 1965's and has same question. What do you make of this very basic set up? Edit - John Albright was correct - missed a wht/blk wire from + Input to 8MF filter cap. New drawing posted Quote Link to comment Share on other sites More sharing options...
JohnA Posted January 24, 2004 Share Posted January 24, 2004 I think you need to go over the wiring again. What you have drawn could be a 6 dB band-pass on the squawker and a 6 dB high pass on the tweeter with no low-pass for the woofer, with minor mistakes on the connections. What is the driver complement? I'll bet it is supposed to have the architecture of a Type A (low-pass, high-pass, high-pass), with the values adjusted for the 500 Hz K-5-J horn. Quote Link to comment Share on other sites More sharing options...
Jon Anderson Posted January 24, 2004 Author Share Posted January 24, 2004 You were correct John. I missed wht/blk from cap to + Input. Attention to detail is everything. So basically a Type A is what I have. Elements are K77 & K55V. Haven't been into bass bin. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.