Chaz Posted February 6, 2004 Share Posted February 6, 2004 My HK 525 receiver stays on Dolby Digital even when not receiving Dolby Digital. This is on my video 3 input where I run my satellite rec. through. I could've swore that it would go to the standard dolby-dts-logic7 mode when not receiving dolby material before. In fact I'm almost positive of this. Any idea's. I read somewhere else about a processor reset. Could this cure the problem? Can I do this or is it left for the techs to do? Any and all help is VERY MUCH APPRECIATED. Thanks Chaz Quote Link to comment Share on other sites More sharing options...
m00n Posted February 6, 2004 Share Posted February 6, 2004 Dude... I'm sorry but I have no idea. The only thing I have ever piped into my hk is a dvd. Nothing else, nada, so it's nothing I have ever had to deal with. Quote Link to comment Share on other sites More sharing options...
Chaz Posted February 6, 2004 Author Share Posted February 6, 2004 Man you are fast!! Thanks for the reply though. Anyone else? Chaz Quote Link to comment Share on other sites More sharing options...
dougdrake Posted February 6, 2004 Share Posted February 6, 2004 Is there an "auto" setting for that input that isn't set? Quote Link to comment Share on other sites More sharing options...
Chaz Posted February 7, 2004 Author Share Posted February 7, 2004 It seems to be working OK today. It DOES switch automatically from Dolby Dig. to the other settings. I don't know what was going on last night but I sure was worried. I'm thinking that the Satellite Rec. was messing up sending a Dolby Dig. signal when the show wasn't Dolby Dig. Oh well, I sure do like the sound of this receiver for the price paid I just hope I don't start having problems with it. I had a Yamaha Pro Logic receiver for over 8 years that the HK replaced and not 1 thing went wrong with it. I just scratched the up grade bug with the HK to get DD&DTS. Chaz Quote Link to comment Share on other sites More sharing options...
lancestorm Posted February 7, 2004 Share Posted February 7, 2004 Well it is good the problem is solved for now...I never ran into that kind of problem when I had my 525. Then again, I am like m00n and only dvd player goes to the receiver. Quote Link to comment Share on other sites More sharing options...
glennbarn Posted February 7, 2004 Share Posted February 7, 2004 For some reason, my AVR 5550 (the European equivalent of AVR 525) behaved the other way around. I'm feeding it with DD 5.1 but it only activates my main speakers though it displays DD5.1. I suspect though that this probably due to the material I'm using. It also didn't allow me to properly configure the multi-room setting. I reset the unit (refer to your manual on how to do this) and it solved the problem. What I'm trying to say is, when you've done everything to correct the problem and yet to no avail, resetting the unit may fix it. Quote Link to comment Share on other sites More sharing options...
Rdog Posted February 10, 2004 Share Posted February 10, 2004 My HK 525, when running cable through it will switch over to logic 7. Do you have it set correctly in the setup menu under each input? Quote Link to comment Share on other sites More sharing options...
gcoker Posted February 10, 2004 Share Posted February 10, 2004 A reciever should not be displaying DD or DTS when it's not receiving a signal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.