Juba310 Posted February 26, 2004 Share Posted February 26, 2004 Right now I have my SVS pci25-31's crossover set on about 75hz. Should I make it lower than this? I'm using it with RB5ii's which suppsedly extend into the High 40hz's. What would be a good crossover frequency for me? Quote Link to comment Share on other sites More sharing options...
nicholtl Posted February 26, 2004 Share Posted February 26, 2004 Try experimenting between 80hz to 120hz. That's often a pretty golden range. Quote Link to comment Share on other sites More sharing options...
ccsakura Posted February 26, 2004 Share Posted February 26, 2004 Since you got the RB5 and SVS 25-31..... try 80hz or 100Hz to see which one works better. I have 100Hz that works better me Quote Link to comment Share on other sites More sharing options...
ironwoods Posted February 26, 2004 Share Posted February 26, 2004 Hi, only you can be the judge. The placement and room parameters will help you to decide. It could also ease the load on your mains amp, depending on your other front end components, to set the X-over at a higher frequency. The hardest part of owning a sub, is setting it to integrate well with your mains. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.