Indianspringsaz Posted January 6, 2005 Share Posted January 6, 2005 I love this stuff. I have been using it for years on my wood around the house. While I have the drivers out of my H-IIs, I took some 0000 steelwool, Feed-n-Wax along with some elbow grease. They look and feel awesome. It really brings out the depth in the wood. Quote Link to comment Share on other sites More sharing options...
michael hurd Posted January 6, 2005 Share Posted January 6, 2005 I would recommend that instead of the ultrafine steel wool mentioned, that you consider using a white 3m scotchbrite ultrafine abrasive pad. This impregnented nylon pad has ultrafine abrasives in it, and works well on cleaning chrome and glass on a vehicle. Just be very careful when cleaning the cabinet before installing the drivers, you would not want to get a tiny piece of the steel wool into the magnet gap on any of the drivers. Quote Link to comment Share on other sites More sharing options...
Deang Posted January 9, 2005 Share Posted January 9, 2005 I use all of the Howard products -- good stuff. I'm a big user of .0000 steel wool too. Mike H. is right though, and now that you're done it isn't a bad idea to drag out the vacuum cleaner and carefully clean out the inside of the cabinets. Quote Link to comment Share on other sites More sharing options...
Indianspringsaz Posted January 9, 2005 Author Share Posted January 9, 2005 I just squirt a bunch on and rub it in with the 0000 steelwool. I really dont think many steel particals are flying around. The wool is saturated with the Feed-n-Wax. Wipe off excess. Wait about an hour. Buff..... NICE Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.