reznil Posted August 24, 2005 Share Posted August 24, 2005 Anyone got the schematics for the AA crossover? I want to change out the caps, but I can't read what's left of the writing on the components. I don't have oil caps, these are dark red plastic about 1 inch by 1/2 inch. There are two of them. I think they say 2 mfd, but I can't see a voltage on them. It also has a large white thing, a cylinder about 3 inches long and 1 inch wide. What the heck is that? Not sure if it's a cap or a large resister. Other than that, it has the standard 2-diode plate and the three transformers. Thanks all, Quote Link to comment Share on other sites More sharing options...
3dzapper Posted August 24, 2005 Share Posted August 24, 2005 You will find it in a post by john Warren in this linked thread: Type AA.jpg. I can't post the pic here today for whatever reason. Rick Quote Link to comment Share on other sites More sharing options...
reznil Posted August 24, 2005 Author Share Posted August 24, 2005 Thanks 3dzapper! Just what I needed. Printed it out and saved it on my computer. Quote Link to comment Share on other sites More sharing options...
Cornwalled Posted August 25, 2005 Share Posted August 25, 2005 I enjoyed finding the AL-3 crossover too. Might have to build one of those for my LaScala, that way I can use the K-55-M. That is the driver it's designed for, right? And not the K-55-X? -Jon Quote Link to comment Share on other sites More sharing options...
reznil Posted August 25, 2005 Author Share Posted August 25, 2005 Hope you're not asking me...I don't know what your talking about! ---------------- On 8/25/2005 12:20:43 AM Cornwalled wrote: I enjoyed finding the AL-3 crossover too. Might have to build one of those for my LaScala, that way I can use the K-55-M. That is the driver it's designed for, right? And not the K-55-X? -Jon ---------------- Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.