split system boi Posted January 23, 2006 Share Posted January 23, 2006 Hi, I was just wanting to know if anyone knows the crossover freq for the mwm spilt system. Cheers split system boi Quote Link to comment Share on other sites More sharing options...
greg928gts Posted January 23, 2006 Share Posted January 23, 2006 It's not set in stone. The MSSM is rated at full power to 150Hz. Midrange down to 400Hz. Tweeters have built in crossovers at 6000Hz. Greg Quote Link to comment Share on other sites More sharing options...
djk Posted January 24, 2006 Share Posted January 24, 2006 The recommended crossover point on the low side for the MSSM is 250hz. It is spec'd at ±2.5dB from 250hz to 1100hz, and rated to handle 150W. The sensitivity is 97dB/W/3M, or 106.5dB/W/1M. The quad manifold MSM can be crossed at 400hz in the three-way, but is usually crossed at 800hz in the four-way, 109.5dB/W/1M. The (Motorola)MTM is ±5dB to 20Khz, the (EV)MMTM is ±5dB to 16Khz. Both are 107.5dB/W/1M The pair of MWM are 108.5dB/W/1M(above 70hz), and 5dB down at 42hz(outdoors) or 38hz(indoors). Quote Link to comment Share on other sites More sharing options...
greg928gts Posted January 24, 2006 Share Posted January 24, 2006 Thanks djk, that's good information. Greg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.