SUB SETTINGS

[jcmusic]

Can tell me the best way to dial in a sub?

Jay

[rcarlton]

Room EQ Wizard (REW). Free program, all you need is a SPL meter, some RCA cable. Good support forum on Home Theater Shack.

[oldbuckster]

Turn volume down until you hear no Bass......Turn up until you know it's there......increase to suit your taste..........simple,easy, cheap, way........

[Strabo]

Here's the foolproof method. Works every time.

[Strabo]

Seriously, at a minimum you will need a meter, some test tones, and a parametric eq.

Without those tools you are guessing. If guessing, then err on the conservative side. Too much bass is fake bass IMO. If you notice the sub then it's too loud and detracting from the music.

The volume should be set so you don't notice it when it's on, but do notice when it goes off.

[oldbuckster]

Seriously, at a minimum you will need a meter, some test tones, and a parametric eq.

Without those tools you are guessing. If guessing, then err on the conservative side. Too much bass is fake bass IMO. If you notice the sub then it's too loud and detracting from the music.

The volume should be set so you don't notice it when it's on, but do notice when it goes off.

Thank You............I'm not alone about Bass....not suppose to dominate sound....

[Me Loves Khorns]

There is a good explanation on the KlipschCorner site about dialing in a sub. Look and see if it helps.

Paul