echuba Posted January 4, 2008 Share Posted January 4, 2008 I recently purchased an Onkyo TX-SR805 receiver and can not get any sound from my subwoofer. Tried Audessy auto speaker set up and sub was not detected. Tried all possible connections and sub does not deliver sound. Blue light is on however. Sub worked perfectly fine a few days ago with Pioneer receiver. Any suggestions on settings, work arounds, solution, etc? Quote Link to comment Share on other sites More sharing options...
kelA Posted January 5, 2008 Share Posted January 5, 2008 Just for starters, did you try what the manual says on page 59, trying different gains on the subwoofer itself? Did you try to over-ride the Audyssey SW speaker setting by selecting yes? Not trying to be a smart***. Quote Link to comment Share on other sites More sharing options...
Bill H. Posted January 5, 2008 Share Posted January 5, 2008 I know I'll get Chided for this, but Maybe talk to the Store where you got your Onkyo? They may know a solution to your Problem. Good Luck. Also in case you didn't have the Manual, here is the hook up guide. http://www.onkyousa.com/quickhookup.cfm?m=TX-SR805 Quote Link to comment Share on other sites More sharing options...
oldslow Posted January 5, 2008 Share Posted January 5, 2008 There are 2 sub hookups on the 805...the one I suspected to be the right one was wrong... maybe you choose that one as well? Quote Link to comment Share on other sites More sharing options...
echuba Posted January 6, 2008 Author Share Posted January 6, 2008 Thanks. Don't think you're being smart. I saw all of this in the manual, but haven't tried it yet. I was hoping that someone had already gone through the "trial and error" pain and could offer me the quick and easy solution. I'll try your recommendations. Thanks again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.